Flash Changes
                         Models 8476 / 8477

General Information:

     Model 8476 is year 2000 ready.
     Model 8477 is year 2000 ready.

     NTJTxxA is the flash diskette level.
     NTKTxxA is the binary image level. (BIOS)
     NOTE: All changes carry forward. That is, if a change is added in 01, it is
           also in 02, 03 etc.

CHANGES for NTKTxxA/NTJTxxA:

NTKT05A/NTJT05A:        BIOS release to manufacturing
NTKT06A/NTJT06A:        Security Update
NTKT07A/NTJT07A:        Cache Code Update
                        DMI code Update
                        IDE Seek use LBA addressing
NTKT08A/NTJT08A:        Flash Code Update
                        DMI Information corrections
                        Network Code updates
                        ECC cache / cpu speed default settings re-defined
                        Security Code bit 7 switch fix
                        HCT updates
NTKT09A/NTJT09A:        Processor Patching Fix
                        Patch code update
                        Memory Hole Fix
                        Fix Configuration Error with CD ROM
                        Fix for Syquest problem
                        NT5.0 / keyboard problem
                        ACPI Memory and I/O updates
NTKT10A/NTJT10A:        APM updates
                        DMI update
                        LS-120 boot fix
                        IPDLT update for rev 3 440BX
                        ISA memory hole / Win 95 fix
                        Processor support update
NTKT11A/NTJT11A:        Windows 98 does not detect ACPI support
NTKT12A/NTJT12A:        Adding new model #s & board serial #s to SMBIOS
                        Memory Hole Fixes
                        Add soft off support to SMI handler
                        new patch file for 652
                        C segment not being shadowed with ISA cards
                        Power LED stays on in Stand-by mode on Win98J
                        NT5 ACPI issues
NTKT13A/NTJT13A:
         System intermittently loses CMOS setup data
         ACPI changes for WINDOWS/98.
         Celeron CPU Name is not correct at Setup Utility
         DMIBIOS information updates.
         Hayes Optima (Serial) modem does not connect


NTKT14A/NTJT14A:
         Add Alertpak Token Ring Support
         IDE Bus Master controller UDMA setting wrong for Zip drive
         Intermittent hang at checkpoint 58 during Win 98 reboot
         PCI modem diagnostics hangs system if using IRQ 11 or 15
         Cannot update model and serial number during bootblock flash.
         Memory beep code after boot block recovery completes.
         E000 segment not fully initialized causing boot hang W/ECC DRAM
         System board identifier is corrupted very occasionally after bootblock
          recovery.


NTKT15A/NTJT15A:

         UDMA mode 0 is being set for non udma devices.
         ADD LSA version .99j
         Will not boot SCO cdrom
         Can't format a ZIP drive under DOS
         Release IRQ12 if no mouse is installed
         Update ACPI for NT 5.0
         Wn98:USB Hub will not work in Bios
         ATI AGP adapter with 64K ROM hangs or causes system to reboot.
         Win95 ignores bios apm settings
         Problems configuring the 5250 Express ISA adapter in PnP
         System fails with 2 adaptec quad port ethernet pci adapters
         APM HCT resume test fails if resume on wake is set.
         Intermittent error beeps during a warm boot
         New Patches for various processors
         Remove video vendor banner during POST.
         Letter 'm' is not recognized in password in some french langs.
         Readme.1st files have incorrect information.


NTKT16A/NTJT16A:
        Serial B does not work correctly if Serial A is disabled
        Monochrome monitor not displaying correct shades of grey
        67x processor cache support update
        IBM 100/10 ISA Ethernet in causes BIOS error 18XX in level NTJT15A
        Disk