          Create/Delete Array Help

The choices in this menu enable you to control your
disk arrays.  After you select a choice, use the Up
and Down Arrow keys to highlight a choice and then
press Enter.

o Select DEFINE A HOT SPARE drive to define one of
  your drives as the hot spare.  The Bay Array list
  on the right side of the screen becomes active.
  Use the Up and Down Arrow keys to highlight the
  drive you want to define as a hot spare and then
  press Enter.

o Select DELETE DISK ARRAY to delete a disk array.
  The last array defined must be deleted first.

o Select CREATE DISK ARRAY to define which drives
  will be part of the array.  The bay array list on
  the right side of the screen becomes active.  Use
  the Up and Down Arrow keys to highlight the drive
  you want to define as part of the array, and then
  press Enter.  Press Esc to return to main menu.
  The total number of arrays created cannot be
  greater than four.

o Select DEFINE LOGICAL DRIVE to define logical
  drives in the array.  The array can be divided
  into one or more logical drives.  Each logical
  drive can be of different size and different RAID
  level.  The total number of logical drives (sum
  over four arrays) cannot be more than eight.
