PCM Status: CONFIRMED

PC Manufacturer: DELL COMPUTER CORP

Model: DELL POWEREDGE 2200/266

System Type: CLIENT

Equivalent Models: NONE

Testkit Version: V4.1

OS/2 Product Tested: OS/2 WARP CONNECT V3

OS/2 FixPacks Applied: NOT PROVIDED

Test results received by the IBM OS2 Compatiblity Program Office for the system model above showed
All Tests Pass for OS/2 Hardware Compatibility Testkit Version V4.1. This system model, as tested by
the Manufacturer and identified in the Machine Configuration file (machine.txt) submitted by the
Manufacturer, is hereby added to the OS/2 Hardware Compatibility List on the Web. Please allow ten
days for posting (www.software.ibm.com/os/warp/hw-cert/pcm/pcm_syst.htm).

Pursuant to the terms of the OS/2 Compatibility Testkit License Agreement, IBM discloses the Test
Report attached. A signed original of the OS/2 Tested and Approved for LAN Systems Logo License
Agreement must be submitted to the OS/2 Compatibility Program Office for use of the logo by the
Manufacturer in any product promotions. For questions regarding these test results or the compatibility
of systems or model configurations not provided herein, contact the Manufacturer per information
provided in the attached Test Report.

Test Report

OS/2 Compatibility Test Results Summary (pcmscore.txt):

PCM Base Test________SNF001_____________PASS
PCM Base Test________SNF002_____________PASS
PCM Base Test________SNF006_____________PASS
PCM Base Test________SNF007_____________PASS
PCM Base Test________SNFBPB_____________PASS
PCM Base Test________SNFREXX____________PASS
PCM Base Test________SNFMVDM____________PASS
PCM Base Test________SNFWIN_____________PASS
PCM Base Test________STRESS_____________PASS
PCM Base Test________KBD________________PASS
PCM Base Test________FVTDISK____________PASS
PCM Base Test________FORMAT_____________PASS
PCM Base Test________TIMERDD____________PASS
PCM Base Test________PRINTDD____________PASS
PCM Base Test________MMPM2______________PASS
PCM Base Test________APM________________NOT RUN
PCM Base Test________PCMCIA_____________NOT RUN
PCM Base Test________SMP________________NOT RUN
.
PCM LAN Client1______ITLPEER.S01________PASS
PCM LAN Client1______ITLPEER.R02________PASS
PCM LAN Client1______ITLLS56.R01________PASS
PCM LAN Client1______ITLLS57.R01________PASS
PCM LAN Client1______ITLMSG.R01_________PASS
PCM LAN Client1______ITLMSG.D01_________PASS
PCM LAN Client1______ITLFTP01.R01_______PASS
.
PCM LAN Client2______ITLLS56.R02________PASS
PCM LAN Client2______ITLLS57.R02________PASS
PCM LAN Client2______ITLFTP02.R02_______PASS
PCM LAN Client2______ITLLD.R02__________PASS

Additional Configuration Information:

1) Used 3Com's 3C905-TX PCI Ethernet card with driver choice "3Com Fast Etherlink/Etherlink XL Family OS/2"; downloaded drivers acquired at www.3com.com from shipping drivers area.
2) Video choice during installation was simple VGA; the Matrox driver was added later.
3) The Matrox Millineum II driver came from the www.matrox.com web site; resolution
tested was 1024 by 768 by 16 million colors. The driver name is "Matrox MGA Millenium
II/Mystique Driver V2.13"
4) The Matrox video card was in the bottom PCI BUS slot and the 3Com 3C905-TX was in
the middle of the three PCI BUS slots. PCI slot position does not matter since no PCI bridge.
5) MPTS-SMP W08504 fixpak was applied on top of OS/2 on both the Domain Controler
and the Additional Server in the Certification testbed for stable Ethernet connectivity.
6) All three of the other systems in the Certification testbed used Intel Pro100B PCI Ethernet.
7) During LAN DISTANCE testing on the PowerEdge 2200, the mouse froze and the NULMODEM device would not register with the MAC when using COM1. When the cable was attached to COM2, the mouse froze even when COM2 was NOT set up for LAN DISTANCE testing. LAN DISTANCE fixpak IP08605 was applied but that did not resolve any of those three problems. Using mouse.sys from OS/2 Warp 4 resolved the freezing of the mouse but did not resolve the NULMODEM/MAC problem on COM1 even though the fixpak was already applied. Using com.sys, mouse.sys and pointdd.sys as a SET from OS/2 Warp 4 after the fixpak allowed LAN DISTANCE to start and complete, but only after much testing seemed to indicate that the "Call and Port Management" function on S01 must NOT be opened for monitoring during testing; otherwise it would finnish all 25 passes but then fail to copy over the log file to S01. It is uncertain if the fixpak is necessary to resolve NULMODEM registration with the MAC. Due to wording in the ITLLD.CMD test program statin
g it was presumed that the testkit naming conventions were used during OS setup, NETADDRESS = "4000AC010202" was also set up in *ALL VERSIONS* of protocol.* in both the C:\IBMCOM and C:\WAL directories.

Machine Configuration (machine.txt):

System Manufacturer___________Dell Computer Corporation
System Model Name_____________Dell PowerEdge 2200/266
Processor-Mhz_________________266 MHZ
Processor on__________________Planar
BUS Type______________________EISA
LocalBUS Type_________________PCI
Symetric Multi-Processor______NO
Number of Processors__________1
.PSD Filename_________________
Bios Manufacturer_____________Dell
BIOS Version__________________A03
BIOS Date_____________________
Installed Memory MB___________128MB
APM Support___________________NO
PCMCIA Support________________NO
Number PCMCIA Slots___________
MOUSE Mini-Serial-Other_______Mini-Din
MOUSE Other type______________
Video Chip Manufacturer_______Matrox
Video Chip Model______________Matrox
Video Memory Size_____________>2MB
Video Chip on_________________Video on Adapter
Video Card Manufacturer_______Matrox
Video Card Model______________Matrox Millineum II
Video Card Type_______________PCI
CDROM Drive___________________YES
CDROM Regular_________________Regular
CDROM Streaming able__________
CDROM Drive Manufacturer______NEC
CDROM Drive Model_____________CDR-1810A 12/24 (464)
CDROM Connected to____________SCSI
Other connection type_________
Sound Support_________________NO
Sound Card Manufacturer_______
Sound Card Model______________
Disk Controller 1 Mfr_________Adaptec
Disk Controller 1 Model_______AIC-7880U/UW
Disk Controller 1 on__________Planar
Disk Controller 2 Mfr_________
Disk Controller 2 Model_______
Disk Controller 2 on__________
Disk Drive 1 Mfr______________Seagate
Disk Drive 1 Model____________ST19171W
Disk Drive 1 Size_____________9GB
Disk Drive 1 Number installed_1
Disk Drive 1 type_____________SCSI
Disk Drive 2 Mfr______________
Disk Drive 2 Model____________
Disk Drive 2 Size_____________
Disk Drive 2 Number installed_
Disk Drive 2 type_____________
Disk Drive 3 Mfr______________
Disk Drive 3 Model____________
Disk Drive 3 Size_____________
Disk Drive 3 Number installed_
Disk Drive 3 type_____________
Network Card 1 Manufacturer___3Com
Network Card 1 Model/Name_____3C905-TX Fast Etherlink XL
Network Card 1 is_____________Ethernet
Network Card 1 type___________PCI Card
Network Card 1 .NIF Name______EL90XIO2.NIF
Network Card 1 .NIF Date______01-09-97
Network Card 1 .OS2 Name______EL90X.OS2
Network Card 1 .OS2 Date______01-23-98
Network Card 1 Driver From____Other
Network Card 2 Manufacturer___
Network Card 2 Model/Name_____
Network Card 2 is_____________
Network Card 2 type___________
Network Card 2 .NIF Name______
Network Card 2 .NIF Date______
Network Card 2 .OS2 Name______
Network Card 2 .OS2 Date______
Network Card 2 Driver From____

Manufacturer Contact Information

Dell Computer Corporation, 800-967-1068