Return-Path: Received: from g4 dot comkal dot net (g4 dot comkal dot net [192.168.1.22]) by mail. (Weasel v1.20) for ; 15 May 2001 01:00:00 From: "Digest" To: "OS/2GenAu Digest" Date: Mon, 15 May 2001 01:00:00 +1000 (EDT) Reply-To: "OS2GenAu" Priority: Normal X-Mailer: CASMailer 1.0 for OS/2 Warp PPC 1.05/G4 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: No. 58 Message-ID: <200105150100.000029G6atmail.> Date:- 15 May 2001 1================================================ From: "Ian Manners" To: "os2genauatos2 dot org dot au" Date: Mon, 14 May 2001 06:37:47 +1000 (EST) Hi All Just a quick note to let everyone know I have updated the list page, the one at the bottom of this email. Cheers Ian B Manners http://www.os2site.com/list/ 2================================================ Date: Mon, 14 May 2001 07:32:37 +1000 From: Ed Durrant Subject: [os2genau] Win 3.1 parallel port support Having found that the Sane-OS2 port does not support parallel port scanners (Linux does, but a kernal level driver would be needed for the OS/2 version to do the same), I am now trying to get the Win3.1 software that came with my scanner to work under Win-os2. The problem I have is that, it appears the scanner.dll / twain driver cannot detect the scanner on the parallel port. There is no configuration of port to use at install time, so I presume the software is looking at irq 7 IO 378 to detect the scanner. I have set the /IRQ option on print01.sys in config.sys and tried various hrdware port configurations without success. I am also using the latest driver for this (Plustek OpticPro 4831P) scanner, all to no avail. I have set all the possible win-os2 settings to what I believe are the most compatible with Win 3.1. Has anyone any ideas ? I think this may be a general problem with accessing the parrallel port from Win 3.1 so if anyone has managed to make any other (non printer) device work from Win-os2 on the parallel port, whatever you have done may also be relevant here. Thanks in advance Ed Durant. 3================================================ Date: Mon, 14 May 2001 11:23:42 +1000 From: Michael Peters Subject: Re: [os2genau] Automating the Chkdsk proceedure Mark, Try this: /* chk.cmd .... to chkdsk several drives in sequence */ /* This utilises a FOR loop where the %% variable takes on the value of each item in parentheses viz. the drive letters. The double percent sign keeps OS/2 from treating the variable as a command-line parameter. */ ' FOR %%1 IN ( F: G: H: I: ) DO chkdsk %%1' Of course, add the parameters you require after chkdsk ( eg. ......... DO chkdsk /F:2 %%1 and change the drive letters to what you need. Mike ----------------------------------------ooo000ooo-------------------------------- mfarnhamatdingoblue dot net dot au wrote: > Mornin' all, > Would it be possible to create a batch or rexx program to > automate the running of chkdsk? At present I have /f:3 checks done all > (14) partions at reboot. As most of these partions are 2-4 gb in size this > does take a while. Now of course I good just do a /f:2 check but I prefer > the stronger checking of the /f:3. What I would like is to have the 4 > partions which hold the system, application files and swapper file checked > at reboot and then just run this progam/batch file to tidy up the rest > without needing to be near my machine to rerun chkdsk. > > Any suggestions on how to achieve this or another solution > will be greatly appreciated. > > Mark > ---------------------------------------------------------------------------- > mfarnhamatdingoblue dot net dot au > Saturday, May 12, 2001 - 11:24 PM > ----------- > "Lord, Grant me the serenity to accept the things that I cannot change, > the courage to change the things I can, and the wisdom to hide the bodies > of the people I had to kill because they pissed me off." ----------- > Mark Farnham > Mackay, Queensland, Australia. > ---------------------------------------------------------------------------- 4================================================ Date: Mon, 14 May 2001 11:33:02 +1100 From: Mark Blackwood Subject: Re: [os2genau] Automating the Chkdsk proceedure Mark, Greetings. There is an "+" option in "/autocheck: in the HPFS.IFS line in the config.sys to chkdsk nominated drives and to check others. eg; IFS=C:\OS2\HPFS.IFS /C:64 /AUTOCHECK:D+EF In this line it will check D and F drives and run chkdsk on E drive every boot. Regards. Mark Blackwood markblatpresto dot net dot au 0413 187 140 mfarnhamatdingoblue dot net dot au wrote: > Mornin' all, > Would it be possible to create a batch or rexx program to > automate the running of chkdsk? At present I have /f:3 checks done all > (14) partions at reboot. As most of these partions are 2-4 gb in size this > does take a while. Now of course I good just do a /f:2 check but I prefer > the stronger checking of the /f:3. What I would like is to have the 4 > partions which hold the system, application files and swapper file checked > at reboot and then just run this progam/batch file to tidy up the rest > without needing to be near my machine to rerun chkdsk. > > Any suggestions on how to achieve this or another solution > will be greatly appreciated. > > Mark > ---------------------------------------------------------------------------- > mfarnhamatdingoblue dot net dot au > Saturday, May 12, 2001 - 11:24 PM > ----------- > "Lord, Grant me the serenity to accept the things that I cannot change, > the courage to change the things I can, and the wisdom to hide the bodies > of the people I had to kill because they pissed me off." ----------- > Mark Farnham > Mackay, Queensland, Australia. > ---------------------------------------------------------------------------- 5================================================ From: "John Angelico" Date: Mon, 14 May 2001 12:21:45 +0900 (EST) Subject: Re: [os2genau] Win 3.1 parallel port support On Mon, 14 May 2001 07:32:37 +1000, Ed Durrant wrote: >Having found that the Sane-OS2 port does not support parallel >port scanners (Linux does, but a kernal level driver would be >needed for the OS/2 version to do the same), I am now trying >to get the Win3.1 software that came with my scanner to work >under Win-os2. > >The problem I have is that, it appears the scanner.dll / twain >driver cannot detect the scanner on the parallel port. There >is no configuration of port to use at install time, so I presume >the software is looking at irq 7 IO 378 to detect the scanner. > >I have set the /IRQ option on print01.sys in config.sys and tried >various hrdware port configurations without success. I am also >using the latest driver for this (Plustek OpticPro 4831P) scanner, >all to no avail. I have set all the possible win-os2 settings to >what I believe are the most compatible with Win 3.1. > >Has anyone any ideas ? I think this may be a general problem >with accessing the parrallel port from Win 3.1 so if anyone has >managed to make any other (non printer) device work from >Win-os2 on the parallel port, whatever you have done may also >be relevant here. Hi Ed. I copied your whole post for context... Have you checked that your port settings in the printer object specifies "Shared Access"? Go to your printer object (YES!) Properties/Output Port. Select LPT-whatever, RMB, select Properties and you should see a check box to check. Best regards John Angelico OS/2 SIG talldadatmelbpc dot org dot au or talldadatkepl dot com dot au -------------------------------------------- PMTagline v1.50 - Copyright, 1996-1997, Stephen Berg and John Angelico .... Deju Glue: PostIt Notes 6================================================ From: Trevor Clarke Subject: Re: [os2genau] Win 3.1 parallel port support Date: Mon, 14 May 2001 12:31:26 +1000 Probably also worth checking out Windy's PORT icon in Control Panel to make sure it isn't looking in the wrong place. Slater & Gordon Solicitors - http://www.slatergordon dot com dot au Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for the delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by return email. Please advise immediately if you or your employer does not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of my firm shall be understood as neither given nor endorsed by it. END================================================