Return-Path: Received: from asio.cia dot com (asio.cia dot com [209.197.145.101]) by mail. (Weasel v1.20) for ; 04 June 2001 01:00:00 From: "Digest" To: "OS/2GenAu Digest" Date: Mon, 4 Jun 2001 01:00:00 +1000 (EDT) Reply-To: "OS2GenAu" Priority: Normal X-Mailer: CASMailer 1.0 for OS/2 Warp PPC 1.05/G4 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: No. 78 Message-ID: <200106040100.000029G6atmail.> Date:- 4 June 2001 1================================================ Date: Sun, 03 Jun 2001 10:27:14 +1000 From: Ed Durrant Subject: Re: [os2genau] Installing Epson printer This ones a puzzler ! You were right with Basedev rather than device= by the way. Where in Australia are you located ?? I wonder if you can get to one of the user groups install days. I know SA and VIC run these, not so sure about NSW but I'm in Sydney, so maybe we can work something out here. Cheers/2 Ed. Alan Duval wrote: > > Ed Durrant wrote: > > > > OK Alan, > > > > 1. To set printer to bi-directional - there will be vrious options - ECP, EPP, Normal, > > etc. - You need one that also displays bi-directional. It may > > also say that it is going to use IRQ 7 and possibly a DMA as > > well, depending which option you select. I tend to go for ECP > > and Bi-directionl (which may be stated as extended rather > > than bi-directional). While you're here check that the printer > > IO address is set to 378 and if identified as such, says LPT1. > > Now that's all set, eascape back to the menu and exit saving > > data. If you acidently change ANYTHING else, exit without > > changing and start again. > > Done ...Parallel port set to 378H/IRQ7 > > Parallel port mode ....set to ECP+EPP > > ECP DMA SELECT .... shown as (3) > > These are the existing settings. > > > 2. Setting the IRQ option. Go to a command prompt and run the > > editor on the config.sys file : > > > > C:> E CONFIG.SYS > > > > Use find (ctrl+F) to search for device=print01.sys and then > > simply add /IRQ at the end of this line. Press F3, save, exit > > shutdown and restart the PC. > > Found as BASEDEVICE=PRINT01.sys .....Added /IRQ and rebooted > > > Now, even if these two options are not set, you should still be > > able to print so what's going wrong ? > > > > Go to connections, printers and right click on ny printer object. > > select properties and go to the printer driver page. right click > > on a printer driver object and select install>new device. Type > > in the directory where the epsonomni4 driver was expanded and > > then select the stylus color 680 from the list displayed and > > click install. A message should be displayed saying that the > > selected driver was successfully installed. > > > > The Driver is now installed. Now open up the templates folder > > and drag and drop the printer template into the printers folder > > (note the printer template is not in the printers folder all ready > > that's the network printer template that we can't use for locally > > attached printers. > > > > After you "drop" this template, you will have a panel displayed > > showing the installed printer drivers on the left - select the > > Epson 680 and on the right select LPT1 (note - by default the > > printer installer will select the next non-used port - often LPT2 > > which you don't have in your PC). Change the name from simply > > printer to whatever you want to call the printer - such as Epson > > 680, press the create button and the panel will close and the > > printer will be installed. > > > > Hope this works ! At least using this method of first installing > > the driver and then creating the printer, we amy be able to see > > better where any problems lie, should they still occur. > > Done. Still doesn't print > > Alan 2============================================= From: "Alan Duval" Subject: Re: [os2genau] Installing Epson printer Date: Sun, 3 Jun 2001 13:40:00 +1000 Hi Ed, I'm in Melbourne and a member of the OS/2 Sig group.We are going to have and install fest for ECom Station 16June, so i'll go along and get it installed and hope the others can help me get the printer installed. It's so frustrating after hearing that you had no problems and making sure the drivers were available before purchase. If I still can't get it working then i'll have to get my old printer repaired and sell the Epson. Maybe over the years my version of OS/2 has become corrupted and ECom station should fix that. Thanks for your help. Alan ---------- > From: Ed Durrant > > This ones a puzzler ! > > You were right with Basedev rather than device= by the way. > > Where in Australia are you located ?? > > I wonder if you can get to one of the user groups install days. > I know SA and VIC run these, not so sure about NSW but I'm in > Sydney, so maybe we can work something out here. > > Cheers/2 > > Ed. > > Alan Duval wrote: > > > > Ed Durrant wrote: > > > > > > OK Alan, > > > > > > 1. To set printer to bi-directional - there will be vrious options - ECP, EPP, Normal, > > > etc. - You need one that also displays bi-directional. It may > > > also say that it is going to use IRQ 7 and possibly a DMA as > > > well, depending which option you select. I tend to go for ECP > > > and Bi-directionl (which may be stated as extended rather > > > than bi-directional). While you're here check that the printer > > > IO address is set to 378 and if identified as such, says LPT1. > > > Now that's all set, eascape back to the menu and exit saving > > > data. If you acidently change ANYTHING else, exit without > > > changing and start again. > > > > Done ...Parallel port set to 378H/IRQ7 > > > > Parallel port mode ....set to ECP+EPP > > > > ECP DMA SELECT .... shown as (3) > > > > These are the existing settings. > > > > > 2. Setting the IRQ option. Go to a command prompt and run the > > > editor on the config.sys file : > > > > > > C:> E CONFIG.SYS > > > > > > Use find (ctrl+F) to search for device=print01.sys and then > > > simply add /IRQ at the end of this line. Press F3, save, exit > > > shutdown and restart the PC. > > > > Found as BASEDEVICE=PRINT01.sys .....Added /IRQ and rebooted > > > > > Now, even if these two options are not set, you should still be > > > able to print so what's going wrong ? > > > > > > Go to connections, printers and right click on ny printer object. > > > select properties and go to the printer driver page. right click > > > on a printer driver object and select install>new device. Type > > > in the directory where the epsonomni4 driver was expanded and > > > then select the stylus color 680 from the list displayed and > > > click install. A message should be displayed saying that the > > > selected driver was successfully installed. > > > > > > The Driver is now installed. Now open up the templates folder > > > and drag and drop the printer template into the printers folder > > > (note the printer template is not in the printers folder all ready > > > that's the network printer template that we can't use for locally > > > attached printers. > > > > > > After you "drop" this template, you will have a panel displayed > > > showing the installed printer drivers on the left - select the > > > Epson 680 and on the right select LPT1 (note - by default the > > > printer installer will select the next non-used port - often LPT2 > > > which you don't have in your PC). Change the name from simply > > > printer to whatever you want to call the printer - such as Epson > > > 680, press the create button and the panel will close and the > > > printer will be installed. > > > > > > Hope this works ! At least using this method of first installing > > > the driver and then creating the printer, we amy be able to see > > > better where any problems lie, should they still occur. > > > > Done. Still doesn't print > > > > Alan 3============================================= Date: Sun, 03 Jun 2001 13:54:08 +1000 From: Ed Durrant Subject: Re: [os2genau] Epston Stylus Installation Just another thought Alan - can you replace the printer cable (I know it works under windoze but windoze 9x printer drivers don't check several things). Ed. Alan Duval wrote: > > Hi Ed, > > I've tried everything suggested but to no avail. Even scrubbed the whole > os/2 operating system and reinstalled it from a backup image in case > something I had corrupted the system. > Then tried installing the printer with Warpguide. That failed as it > couldn't create a printer object. Tried your method a couple of times > also. There seems to be no connection between the computer and the > printer. > Maybe i'll have to wait until I get ECom Station installed and try > again. In the meantime I guess i'l have to copy anything i need to print > to a Win data partition and print from Win95. > Has anyone any other suggestions? > > Alan Duval 4============================================= Date: Fri, 01 Jun 2001 18:30:01 +0830 From: Leigh Bunting Subject: [os2genau] This really Microsucks Microsoft are doing a trial in Australia and New Zealand where the only way you can purchase Office XP, is as a fully packaged product or by paying a yearly subscription that sounds a _little_ overpriced to me... >* OFFICE XP SUBSCRIPTIONS IN AUSTRALIA AND NEW ZEALAND, NOT UNITED >STATES >Microsoft has decided not to offer a subscription plan for Office XP in the United States, but >the firm will roll it out in Australia and New Zealand. According to The Standard, the annual >cost of an Office XP subscription in Australia will be between one-fourth and one-third of the >non-upgrade retail price. > >http://www.thestandard dot com/article/0,1902,24298,00.html -- Leigh Bunting Colonel Light Gardens South Australia Find out more about Col. Light Gdns. here - http://www.chariot dot net dot au/~pknight/clghs/ 5============================================= Date: Sun, 03 Jun 2001 20:05:08 +1000 From: Ed Durrant Subject: Re: [os2genau] This really Microsucks As most companies I have come across have stayed with office 97 and not upgraded to Office 2000, I suspect even less will consider upgrading to Ofice XP. Could X P mean e'X'treemly 'P'ricey ??? :> Cheers/2 Ed. Leigh Bunting wrote: > > Microsoft are doing a trial in Australia and New Zealand where the only > way you can purchase Office XP, is as a fully packaged product or by > paying a yearly subscription that sounds a _little_ overpriced to me... > > >* OFFICE XP SUBSCRIPTIONS IN AUSTRALIA AND NEW ZEALAND, NOT UNITED > >STATES > >Microsoft has decided not to offer a subscription plan for Office XP in > the United States, but >the firm will roll it out in Australia and New > Zealand. According to The Standard, the annual >cost of an Office XP > subscription in Australia will be between one-fourth and one-third of > the >non-upgrade retail price. > > > >http://www.thestandard dot com/article/0,1902,24298,00.html > -- > Leigh Bunting > Colonel Light Gardens > South Australia > Find out more about Col. Light Gdns. here - > http://www.chariot dot net dot au/~pknight/clghs/ 6============================================= Date: Sun, 03 Jun 2001 21:15:04 +1100 From: Alan Duval Subject: Re: [os2genau] Epston Stylus Installation Hi Ed, I thought about this today. I haven't got another cable so I think i'll buy a cable to the specifications suggested in the manual. My present cable comes off my ZIP drive so i disconected the Zip drive and took the cable directly from the computer to the printer but it still didn't work. Your suggestion is worth a try. Probably won't be able to do this till later in the week. My HP Deskjet 660 was working on this present cable till it started playing up but maybe the Epson setup is more critical.I know Bob Traynor always says to check the hardware if nothing else works. Regards, Alan Ed Durrant wrote: > > Just another thought Alan - can you replace the printer > cable (I know it works under windoze but windoze 9x > printer drivers don't check several things). > > Ed. > > Alan Duval wrote: > > > > Hi Ed, > > > > I've tried everything suggested but to no avail. Even scrubbed the whole > > os/2 operating system and reinstalled it from a backup image in case > > something I had corrupted the system. > > Then tried installing the printer with Warpguide. That failed as it > > couldn't create a printer object. Tried your method a couple of times > > also. There seems to be no connection between the computer and the > > printer. > > Maybe i'll have to wait until I get ECom Station installed and try > > again. In the meantime I guess i'l have to copy anything i need to print > > to a Win data partition and print from Win95. > > Has anyone any other suggestions? > > > > Alan Duval 7============================================= Date: Sun, 03 Jun 2001 21:27:26 +1000 From: Ed Durrant Subject: Re: [os2genau] Epston Stylus Installation Actually, usually HP printers are also critical of printer cables, but as I say if you could borrow another one for a test it would seem useful. You just mentioned that the printer cable went via your Zip drive. You didn't mention this before. It is possible that the software that drives the Zip drive could be what is stopping your printer from printing. Can you disable all Zip related software and drivers (in config.sys) and see if, after a cold reboot, the printer then works ? Good Luck Ed. Alan Duval wrote: > > Hi Ed, > > I thought about this today. I haven't got another cable so I think i'll > buy a cable to the specifications suggested in the manual. My present > cable comes off my ZIP drive so i disconected the Zip drive and took the > cable directly from the computer to the printer but it still didn't > work. Your suggestion is worth a try. Probably won't be able to do this > till later in the week. > My HP Deskjet 660 was working on this present cable till it started > playing up but maybe the Epson setup is more critical.I know Bob Traynor > always says to check the hardware if nothing else works. > > Regards, > > Alan > > Ed Durrant wrote: > > > > Just another thought Alan - can you replace the printer > > cable (I know it works under windoze but windoze 9x > > printer drivers don't check several things). > > > > Ed. > > > > Alan Duval wrote: > > > > > > Hi Ed, > > > > > > I've tried everything suggested but to no avail. Even scrubbed the whole > > > os/2 operating system and reinstalled it from a backup image in case > > > something I had corrupted the system. > > > Then tried installing the printer with Warpguide. That failed as it > > > couldn't create a printer object. Tried your method a couple of times > > > also. There seems to be no connection between the computer and the > > > printer. > > > Maybe i'll have to wait until I get ECom Station installed and try > > > again. In the meantime I guess i'l have to copy anything i need to print > > > to a Win data partition and print from Win95. > > > Has anyone any other suggestions? > > > > > > Alan Duval 8============================================= Date: Sun, 03 Jun 2001 22:35:42 +1100 From: Michael Taylor Subject: Re: [os2genau] This really Microsucks I got the latest MS Communique magazine and the price for XP is over AUS$1000- even for the standard edition. I think you have the name right! Ed Durrant wrote: > > As most companies I have come across have stayed with office > 97 and not upgraded to Office 2000, I suspect even less will > consider upgrading to Ofice XP. > > Could X P mean e'X'treemly 'P'ricey ??? :> END=============================================