From: "Digest" To: "OS/2GenAu Digest" Date: Thu, 01 Nov 2001 01:00:00 +1100 (EDT) Subject: [os2genau_digest] No. 197 Reply-To: Date:- 01 November 2001 Please reply to ianatos2site dot com to post to the list. The posting problem will be fixed in November, this only affects people on the digest list. 1================================================ Date: Wed, 31 Oct 2001 06:02:41 +0930 From: Andrew Hood Subject: [os2genau] Help!! Fried fdisk Hello all, I was given a copy of Red Hat 6.2 Linux which I was trying to install to try it out. I managed to get it on one of my disks but I forgot to put it in my boot manager and when I tried to start fdisk (from either install floppies or fp15) it crashed with a trap 000d. I figure that it is probably the linux partitions that it doesn't like and I will need to delete them with the linux fdisk before it will work again. I wonder if I make all the necessary partitions with OS/2 fdisk then format them with linux will work without frying something? Any help / comments etc appreciated Andrew Hood PS: for an operating system that is meant to be able to run on older smaller systems Linux is a big bloated piece of software. The bloody thing won't let me install it on a 1 Gig disk at the end of my disk chain so I had to carve up a 4 Gig one at the start. What a pain! 2============================================== Date: Wed, 31 Oct 2001 09:59:07 From: Voytek Eymont Subject: Re: [os2genau] Help!! Fried fdisk ** Reply to note from Andrew Hood Wed, 31 Oct 2001 06:02:41 +0930 > PS: for an operating system that is meant to be able to run on older smaller > systems Linux is a big bloated piece of software. The bloody thing won't let me > install it on a 1 Gig disk at the end of my disk chain so I had to carve up a 4 > Gig one at the start. What a pain! well, if you install just as character mode, it will fit on anything; if you do a full install, with X, etc: YES, it does take MORE HD; YES, IT DOES TAKE MORE GRUNT to run than OS/2. the same hardware that I can run OS/2 with PM more than adequately, Linux *with* X is like cold molasses.... Voytek Eymont SBT Information Systems Pty Ltd http://www.sbt dot net dot au/links/ phone +61-2 9310-1144 fax +61-2 9310-1118 3============================================== Subject: Re: [os2genau] Help!! Fried fdisk From: "Brad Van Eps/NCO/CEtv" Date: Wed, 31 Oct 2001 10:12:22 +1000 Hi, If you can get hold of it, give PowerQuest's "PartitionMagic" a shot as it supports HPFS, EXT2 as well as IBM's Boot Manager. I have used this quite sucessfully in the past to sort out a mess of Windoze, OS/2 and Linux partitions, selectable by Boot Manager, on the one machine. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Brad van Eps, B.Eng Senior DBA Database Administration group Austar Communications Gold Coast, QLD Ph: (075) 557 5630 Fax: (075) 574 1417 E-mail: bradvanepsataustar dot com dot au OS/2 Zealot! %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Andrew Hood us dot com dot au> cc: Subject: [os2genau] Help!! Fried fdisk 10/31/2001 06:32 AM Please respond to os2genau Hello all, I was given a copy of Red Hat 6.2 Linux which I was trying to install to try it out. I managed to get it on one of my disks but I forgot to put it in my boot manager and when I tried to start fdisk (from either install floppies or fp15) it crashed with a trap 000d. I figure that it is probably the linux partitions that it doesn't like and I will need to delete them with the linux fdisk before it will work again. I wonder if I make all the necessary partitions with OS/2 fdisk then format them with linux will work without frying something? Any help / comments etc appreciated Andrew Hood *************************************************************************************************************************************************************************** This email and any files transmitted with it, are confidential and is intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. This footnote also confirms that this email message has been scanned by AUSTAR Communications content and virus scanning applications for the presence of computer viruses. *************************************************************************************************************************************************************************** 4============================================== Date: Wed, 31 Oct 2001 12:00:28 +1100 (EST) From: John Wildgoose Subject: Re: [os2genau] Help!! Fried fdisk On Wed, 31 Oct 2001, Voytek Eymont wrote: > ** Reply to note from Andrew Hood Wed, 31 Oct 2001 06:02:41 +0930 > > > > PS: for an operating system that is meant to be able to run on older smaller > > systems Linux is a big bloated piece of software. The bloody thing won't let me > > install it on a 1 Gig disk at the end of my disk chain so I had to carve up a 4 > > Gig one at the start. What a pain! Be careful not to confuse the distribution with the operating system. I use Caldera dist and can fit quite happily onto approx 350Mb, but you have to not install all the apps and tools. This is not a major problem as you can generally get a subset that does ok, and anyway if you need more they can be mounted and installed onto another disk. I have linux and os/2 running on a P200. I used the linux fdisk as it supports a greater range of partition types, but I installed the os/2 bootmanager (this means that I initially boot to the os/2 boot manager then select os/2 or linux (default is last one used), if choosing linux I then get lilo which lets me choose from linux and or windows). jaw > > well, if you install just as character mode, it will fit on anything; > if you do a full install, with X, etc: > > YES, it does take MORE HD; > YES, IT DOES TAKE MORE GRUNT to run than OS/2. > > the same hardware that I can run OS/2 with PM more than adequately, Linux > *with* X is like cold molasses.... > > Voytek Eymont > SBT Information Systems Pty Ltd > http://www.sbt dot net dot au/links/ > phone +61-2 9310-1144 fax +61-2 9310-1118 > 5============================================== Date: Wed, 31 Oct 2001 12:05:02 +1100 (EST) From: John Wildgoose Subject: Re: [os2genau] Help!! Fried fdisk On Wed, 31 Oct 2001, Brad Van Eps/NCO/CEtv wrote: > > Hi, > > If you can get hold of it, give PowerQuest's "PartitionMagic" a shot > as it supports HPFS, EXT2 as well as IBM's Boot Manager. I have used this > quite sucessfully in the past to sort out a mess of Windoze, OS/2 and Linux > partitions, selectable by Boot Manager, on the one machine. PartitionMagic is good for this, but I think you may need the full commercial version as I think the cut down free versions you get with the newers linux dists assume you have windows to start from, and do not provide all the features to do a self configured install. jaw > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% > Brad van Eps, B.Eng Senior DBA > Database Administration group > Austar Communications > Gold Coast, QLD > Ph: (075) 557 5630 Fax: (075) 574 1417 > E-mail: bradvanepsataustar dot com dot au > > OS/2 Zealot! > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% > > > > > > > Andrew Hood > > us dot com dot au> cc: > Subject: [os2genau] Help!! Fried fdisk > 10/31/2001 > 06:32 AM > Please respond > to os2genau > > > > > > > Hello all, > > I was given a copy of Red Hat 6.2 Linux which I was trying to install to > try it > out. I managed to get it on one of my disks but I forgot to put it in my > boot > manager and when I tried to start fdisk (from either install floppies or > fp15) > it crashed with a trap 000d. > > I figure that it is probably the linux partitions that it doesn't like and > I > will need to delete them with the linux fdisk before it will work again. I > wonder if I make all the necessary partitions with OS/2 fdisk then format > them > with linux will work without frying something? > > Any help / comments etc appreciated > > Andrew Hood > > > > > > > *************************************************************************************************************************************************************************** > This email and any files transmitted with it, are confidential and is intended solely for the use of the individual or entity to whom they are addressed. > If you have received this email in error, please notify the system manager. > > This footnote also confirms that this email message has been scanned by AUSTAR Communications content and virus scanning applications > for the presence of computer viruses. > *************************************************************************************************************************************************************************** > 6============================================== Date: Wed, 31 Oct 2001 10:55:55 +0800 From: Bob Subject: Re: [os2genau] Help!! Fried fdisk Voytek Eymont wrote: > > ** Reply to note from Andrew Hood Wed, 31 Oct 2001 06:02:41 +0930 > > > PS: for an operating system that is meant to be able to run on older smaller > > systems Linux is a big bloated piece of software. The bloody thing won't let me > > install it on a 1 Gig disk at the end of my disk chain so I had to carve up a 4 > > Gig one at the start. What a pain! > > well, if you install just as character mode, it will fit on anything; > if you do a full install, with X, etc: > > YES, it does take MORE HD; > YES, IT DOES TAKE MORE GRUNT to run than OS/2. > > the same hardware that I can run OS/2 with PM more than adequately, Linux > *with* X is like cold molasses.... > > Voytek Eymont This is one of those "how long is a piece of string" questions. It very much depends on what distribution you're installing and how you go about installing it.I have a very old 486 laptop [1] 200Mb disk and 8Mb ram that has RH6.1 on it. Yes I _do_ run X ! but I sure as eggs don't even consider Gnome or KDE as a windows manager ( FYI I run afterstep which is gnome enabled so I don't miss out on too many goodies :). I think the big trick is to grit your teeth and choose expert mode to install with and then be very ruthless in what you don't install when asked what packages you want to have. The other problem may be ( sorry if this has been covered, I only just discovered the thread) that your bios is unable to boot beyond 1024 cyl. [1] why bother do I hear? 1/ because its there :). 2/ so I can d/l from my digicam while on the road. -- Bob. 7============================================== From: "Robert Traynor (BobT)" Date: Wed, 31 Oct 2001 15:20:08 +1100 Subject: Re: [os2genau] Help!! Fried fdisk Hi Andrew, Yes, making the ALL the partitions with os/2's fdisk is better than using linux's fdisk. Partition Magic upto version 6.01 is ok also, but NOT the most recent version which is currently v7.0. They have dropped the HPFS support in the v7.0 version. However, note that Partition Magic will try to convert any extended partition into the Microsoft Extended-X type. And this will upset Os/2's fdisk and possibly, Linux also. Partition Magic 6 will ASK you IF you want to "upgrade" the extended partition to Extended-X and give you the option of refusing. But Partition Magic "Proffessional" v6.01 will not even ask. It just goes ahead and converts it anyway. Very unhelpfull. No command line switches are provided to be able to turn this "feature" off, either. :( Partition Magic has a utility that you have to copy to a floppy disk called ptedit.exe. This is a Partition Table editor that will enable you to change the "TYPE" of the Extended Partition to the standard type, expected by os/2 and (probably) linux. Personally, I do not use Partition Magic from windows, but prefer to boot from floppy or from Win9x DOS and run from there. Same goes for the ptedit. In the case of Ptedit ONLY, load it AFTER your dos mouse driver as ptedit it requires a mouse to use effectively. A working knowledge of the layout of a hard disk is required. I recommend practicing on a spare hard disk first. And if using a ide/scsi mix of hard drives note that Ptedit will often (always in MY experience) list scsi drives BEFORE the ide ones. Even if the ide are first. The reason for some problems with linux's fdisk type utility is that linux numbers partitions in the ORDER in which they are CREATED. This MAY cause problems when you later on use os/2 fdisk and definitely if you later on use any version of Partition Magic. So CREATE partitions with Os/2 fdisk and then when installing linux, format those partitions from within the linux install program. Good luck. Regards Robert Traynor (BobT) 31 October 2001 On Wed, 31 Oct 2001 06:02:41 +0930, Andrew Hood wrote: > Hello all, > > I was given a copy of Red Hat 6.2 Linux which I was trying to install to try it > out. I managed to get it on one of my disks but I forgot to put it in my boot > manager and when I tried to start fdisk (from either install floppies or fp15) > it crashed with a trap 000d. > > I figure that it is probably the linux partitions that it doesn't like and I > will need to delete them with the linux fdisk before it will work again. I > wonder if I make all the necessary partitions with OS/2 fdisk then format them > with linux will work without frying something? > > Any help / comments etc appreciated > > Andrew Hood > > PS: for an operating system that is meant to be able to run on older smaller > systems Linux is a big bloated piece of software. The bloody thing won't let me > install it on a 1 Gig disk at the end of my disk chain so I had to carve up a 4 > Gig one at the start. What a pain! ,-._|\ Robert Traynor (BobT) / Oz \ email rtraynoratnetstra dot com dot au \_,--.x/ 8============================================== From: "Alan Duval" Subject: [os2genau] Scanners and eCS Date: Wed, 31 Oct 2001 17:17:53 +1100 Hi everyone, I have removed eCS and gone back to Warp 4 as I am unable to get my scanner to work on eCS. I have a HP 4P scanner and use Copyshop to access it. After installing eCS I installed Copyshop but although the startup screen showed that eCS had found the scanner Copyshop was unable to access it. Does anyone else use Copyshop and if so have they been able to get it working on eCS? Regards, Alan Duval 9============================================== From: "Gavin Miller" Date: Thu, 01 Nov 2001 05:34:11 -0500 (EST) Subject: Re: [os2genau] Help!! Fried fdisk Hi Andrew, The trick here is to plan ahead. It maybe too late to save your partitions and will have to create them again from scratch to stop your trap 000d (if you can't use partition magic.). If you can boot OS/2, do so and try fdisk to see if will work first. OS/2's fdisk can and will work if you create the partition you want Linux on and format it as HPFS or FAT from OS/2. DO NOT add that to the boot manager just yet. Install Red Hat using the advanced install and change the partition type to Linux Native with linux fdsik. Don't forget to save this to the table before exiting the Linux fdisk. Proceed with the installation. For me, It worked better without manually mounting drives and letting Linux do all that. Make sure you install LILO on the new linux partition and NOT the primary boot partition of your hard disk. After you've finnished installing Red Hat and made sure it works, you should be able to restart your machine and Boot manager should popup. Boot OS/2 and run fdisk. Your Linux partition will be split into three (if you let Linux set it up for you). Choose the partition you install Linux on and add that to bootmanager. That should do it. Hope this helps. Gavin On Wed, 31 Oct 2001 06:02:41 +0930, Andrew Hood wrote: >Hello all, > >I was given a copy of Red Hat 6.2 Linux which I was trying to install to try it >out. I managed to get it on one of my disks but I forgot to put it in my boot >manager and when I tried to start fdisk (from either install floppies or fp15) >it crashed with a trap 000d. > >I figure that it is probably the linux partitions that it doesn't like and I >will need to delete them with the linux fdisk before it will work again. I >wonder if I make all the necessary partitions with OS/2 fdisk then format them >with linux will work without frying something? > >Any help / comments etc appreciated > >Andrew Hood > >PS: for an operating system that is meant to be able to run on older smaller >systems Linux is a big bloated piece of software. The bloody thing won't let me >install it on a 1 Gig disk at the end of my disk chain so I had to carve up a 4 >Gig one at the start. What a pain! > 10============================================== From: "Steve Edmonds" Date: Thu, 01 Nov 2001 09:34:24 +1200 (NZST) Subject: Re: [os2genau] Help!! Fried fdisk Hi, not sure what happened to my earlier post, but Partitioning with os/2's fdisk provides best results. I have not had problems using linux's fdisk and os/2, even on same disk but; linux could not be added to BM menu unless partitioned and first formatted with os/2. linux changed BM from the startup partition and had to reset startable. This was ok as I always set C: as bootable dos (TO BE SURE, TO BE SURE). There are also issues with booting, cylinder limits, >2gig, bios things which it pays to read about. I have linux on my 4th drive on this machine and use loadlin to boot as the bios won't (mix of ide & scsi, int 13 thing) I have also used ptedit to recover an os/2, nt drive that nt screwed. Nerve racking but logical and straight forward. Without changing anything you can at least see the cause of the problem. Practising on a spare drive is good. Partition and format it the way you think the bung drive is and compare the structures. Read the ptedit info regarding partition boundaries as the bigest trouble I have had with nt/linux and os/2 is ptedit reporting overlapping boundries. steve On Wed, 31 Oct 2001 06:02:41 +0930, Andrew Hood wrote: >Hello all, > >I was given a copy of Red Hat 6.2 Linux which I was trying to install to try it >out. I managed to get it on one of my disks but I forgot to put it in my boot >manager and when I tried to start fdisk (from either install floppies or fp15) >it crashed with a trap 000d. > >I figure that it is probably the linux partitions that it doesn't like and I >will need to delete them with the linux fdisk before it will work again. I >wonder if I make all the necessary partitions with OS/2 fdisk then format them >with linux will work without frying something? > >Any help / comments etc appreciated > >Andrew Hood > >PS: for an operating system that is meant to be able to run on older smaller >systems Linux is a big bloated piece of software. The bloody thing won't let me >install it on a 1 Gig disk at the end of my disk chain so I had to carve up a 4 >Gig one at the start. What a pain! 11============================================== From: "Daryl Pilkington" Date: Wed, 31 Oct 2001 22:51:52 +1100 (EDT) Subject: Re: [os2genau] Scanners and eCS Hi Alan, If you can ZIP up CopyShop & email it to me directly, I can test eCS & CopyShop with my HP 4p. Please also ZIP up your config.sys & send that too. eCS & PMSane works fine with my HP 4p. On Wed, 31 Oct 2001 17:17:53 +1100, Alan Duval wrote: > > >Hi everyone, > >I have removed eCS and gone back to Warp 4 as I am unable to get my scanner >to work on eCS. >I have a HP 4P scanner and use Copyshop to access it. After installing eCS >I installed Copyshop but although the startup screen showed that eCS had >found the scanner Copyshop was unable to access it. > >Does anyone else use Copyshop and if so have they been able to get it >working on eCS? > Regards, Daryl Pilkington //// The PC-Therapist, Business Computing Integration O OS/2 Warp, Redhat Linux, DB2 IBM Certified Systems Expert email: darylpatpc-therapist dot com dot au ICQ: 91914134 Tel: +61-2-8902-1300 Mob: +61-425-251-300 Fax: +61-2-9411-3720 Mob SMS: 0425251300.0000atorangenet dot com dot au (160 characters max) 12============================================== Date: Wed, 31 Oct 2001 23:02:05 +1100 From: Ed Durrant Subject: Re: [os2genau] Scanners and eCS Hi, I also have tales of wo with eCs ! In fact I think the problems I had are not related to the base OS but rather some of the additional drivers and apps one can install. In my case I cleared a partition on my existing OS/2 WP4 FP15 machine, so that I could perform a true comparison (ie on the same hardware). I had problems initially installing eCs but this was solved by deleting the partition completly and creating and long formatting it during the eCs install. Once installed eCs ran like a DOG ! I've had faster response, remote controlling a system over a 2400 Baud dial-up link ! So it obviously didn't like something in my system - I suspect the Trio 64 3D Video, but before I tried installing different drivers, I decided to boot my normal Warp partition and check the system itself was OK. Horror of horrors - the boot stopped with the "OS/2 can operate your floppy or harddisk error" ! I tried all the usual CHKDSK, ALT+F1 restore archive "tricks" all to no avail and I have ended up having to re-install my main OS partition. So I'm now running OS/2 Warp 4 Convienience pack 1 at FP1. What I suspect happened, and this is what may also be relevant to your problem, Alan, is that eCs installed the Dani series of drivers replacing the standard IBM ones. If these are not installed correctly, they can cause access to stop to both IDE and SCSI/ATAPI devices. Guess what ! It appears the install procedure for these not only install to the partition you are installing to, but also to C: - hence my problems ! At this stage, it's probably best to install eCs on to a separate machine, as some of the "add-ons" do seem to be less than perfectly behaved ! As we say, one lives and learns ! Cheers/2 Ed. Alan Duval wrote: > Hi everyone, > > I have removed eCS and gone back to Warp 4 as I am unable to get my scanner > to work on eCS.