From: Digest To: "OS/2GenAu Digest" Date: Thu, 15 Jan 2004 00:01:02 EST-10EDT,10,-1,0,7200,3,-1,0,7200,3600 Subject: [os2genau_digest] No. 778 Reply-To: X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Wednesday 14 January 2004 Number 778 ************************************************** Subjects for today 1 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : Ed Durrant 2 SEC: UNCLASSIFIED:- Gobsmacked : Dennis.Nolan at defence.gov.au 3 Re: SEC: UNCLASSIFIED:- Gobsmacked : David Shearer" 4 Re: OpenOffice v1.1 for OS/2 & eCS : David Shearer" 5 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : Daryl Pilkington 6 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : voytek at sbt dot net dot au 7 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : Mark Dodel" 8 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : Kris Steenhaut 9 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : Mark Dodel" 10 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : John Angelico" 11 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : Daryl Pilkington 12 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : John Angelico" 13 Re: OpenOffice v1.1 for OS/2 & eCS : Ed Durrant 14 Re: SCSI Scanner on BT-946C SCSI card s/be 956C card : Kris Steenhaut **= Email 1 ==========================** Date: Wed, 14 Jan 2004 07:02:18 +1100 From: Ed Durrant Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card Hi John, I don't hold out much hope of you finding a new SCSI based flatbed scanner with adaptec card nowadays, they're almost all USB attached now. I (and a few others) were lucky enough to be able to "snap up" a $99 brand new Canon FB620S with adaptec SCSI card a couple of years ago but even then it was difficult to find SCSI attached scanners. I believe support for parrallel port scanners is now included in the OS/2 port of SANE and I keep thinking about trying my Plustek OpticPro out but since the Canon works perfectly, I never seem to find the time ! You should be able to pick up an adaptec 2940 card at a computer meet for $40-$50 without too much problems though. It needs to be a 2940 if you want tio boot off a HD also attached to the card, the 2910 for example, has no Bios and hence will not boot. Cheers/2 Ed. John Angelico wrote: > On Fri, 09 Jan 2004 21:39:07 +1100, Ed Durrant wrote: > > Hi Ed and all. > > we still couldn't get the connection right: either the card was not found > by the BIOS and the machine tried to boot from a floppy or CD (the hard drive > is on the same card) OR the settings stumped the card and it refused to allow > the boot process to go any further > > So, despite the "fact" that the scanner is theoretically supported by the > SANE/TAME combo, Ed is almost right: I'm on the hunt for a flat-bed SCSI > scanner with it's own card - probably adaptec. ---------------------------------------------------------------------------------- **= Email 2 ==========================** Date: Wed, 14 Jan 2004 09:42:40 +1000 From: Dennis.Nolan at defence.gov.au Subject: SEC: UNCLASSIFIED:- Gobsmacked Hi all At work they run NT desktops, and having taken some work photos I attempted to have my work computer dowmload the images. Naturally it didn't happen. Maybe the USB ports are not USB 2.0 Anyway they don't like individualism on the network, and so they have limited the settings and system info access, so what is available on a normal desktop installation is not available here. But while trying to find out what type of USB was fitted I got into the system properties And there in the Environment page is a Syatem variable Os2LibPath C:\WINNT\system32\os2\dll; I never expexted that. Regards Dennis Mr. Dennis J. Nolan Repair & Maintenance Contact Details: Help Desk 03 5950 7763 Workshop 03 5950 7484 Fax 03 5950 7934 Email: dennis.nolan at defence.gov.au LEGAL NOTICE IMPORTANT: This email remains the property of the Australian Defence Organisation and is subject to the jurisdiction of section 70 of the Crimes Act 1914. If you have received this email in error, you are requested to contact the sender and delete the email [attachments have been removed] ---------------------------------------------------------------------------------- **= Email 3 ==========================** Date: Wed, 14 Jan 2004 09:00:53 +1000 From: "David Shearer" Subject: Re: SEC: UNCLASSIFIED:- Gobsmacked 1. NT doesn't natively support USB - not likely that Microsoft will ever support it as it doesn't support NT anymore. To get USB support you are forced as an organisation to upgrade to Win 2000 or XP. 2. NT has always had a basic OS/2 subsystem -- only supported 16bit text mode apps. Eg you could run Word 5.5 or 5.0 as an os/2 text mode app under NT. Word has it that MS did have an addon to allow Presentation Manager apps to run under NT - but it would be almost impossible to come across now. David On Wed, 14 Jan 2004 09:42:40 +1000, Dennis.Nolan at defence.gov.au wrote: >Hi all > >At work they run NT desktops, and having taken some work photos I >attempted to have my work computer dowmload the images. > >Naturally it didn't happen. > >Maybe the USB ports are not USB 2.0 > >Anyway they don't like individualism on the network, and so they have >limited the settings and system info access, so what is available on a >normal desktop installation is not available here. > >But while trying to find out what type of USB was fitted I got into the >system properties > >And there in the Environment page is a Syatem variable Os2LibPath >C:\WINNT\system32\os2\dll; > >I never expexted that. > >Regards >Dennis > >Mr. Dennis J. Nolan >Repair & Maintenance > >Contact Details: > Help Desk 03 5950 7763 > Workshop 03 5950 7484 > Fax 03 5950 7934 > > Email: dennis.nolan at defence.gov.au > > >LEGAL NOTICE >IMPORTANT: This email remains the property of the Australian Defence >Organisation and is subject to the jurisdiction of section 70 of the >Crimes Act 1914. If you have received this email in error, you are >requested to contact the sender and delete the email >[attachments have been removed] > ---------------------------------------------------------------------------------- **= Email 4 ==========================** Date: Wed, 14 Jan 2004 09:07:21 +1000 From: "David Shearer" Subject: Re: OpenOffice v1.1 for OS/2 & eCS I especially like the "save to PDF" option - I have tried it on a basic Word document and it worked really well. Sure the system is a bit slow to load but so was Staroffice 5.1 as I recall. I run it on eCs 1.1 and a P3 450mhz. It probably also needs import filters for Smartsuite documents as well - but it has excellent Excel and Word support. David On Tue, 13 Jan 2004 22:35:47 +1000, Mike O'Connor wrote: >David Shearer wrote: > >>In one word - yes - easy to install, flawless, so far no crashes etc. If this is the beta what will the GA look >>like?? >> >>David >> >>On Mon, 12 Jan 2004 22:51:59 +1100, voytek at sbt dot net dot au wrote: >> >>>>For those that haven't seen this yet, OpenOffice v1.1 Beta 1 is now >>>>available for OS/2 & eCS from >>>>http://www.innotek.de/products/openofficeos2/beta/ >>>> >>>so what;s it like, worth downloading ? >>> > >Hi David, > >That's an encouraging note. > >-- >Regards, >Mike > >Failed the exam for >-------------------- >MCSE - Minesweeper Consultant and Solitaire Expert >-------------------- >[ISP blocks *.exe attachments] >[Please use zipped versions of above] > > > ---------------------------------------------------------------------------------- **= Email 5 ==========================** Date: Wed, 14 Jan 2004 10:38:48 +1100 From: Daryl Pilkington Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card Hi John, Google also being my friend, quickly found this to be an Ultra-Wide, 3 connector card. Having had some painful experiences with a similiarly configured Adaptec AHA2940UW, you cannot connect devices to all 3 connectors simultaneously. You mention you couldn't get the connection right, I suspect the above is why. Here is a sample layout of a typical termination. Note this sample does not use the external connection since both internal connectors are used. Could you supply your configuration? 2940UW controller Wide & narrow devices connected to both 50 & 68pin headers: n n w w |--------|----------||-------|-----| CD-ROM Tape Controller HDD Terminator (Active) This is achieved by enabling the high-side termination on the controller card & disabling the low-side. Termination power for the active terminator is provided by the tape unit. John Angelico wrote: > On Fri, 09 Jan 2004 21:39:07 +1100, Ed Durrant wrote: > > Hi Ed and all. > > After some > a) checking of the card software utility > b) web searching - successful > and > c) fiddling around > > the final upshot is > a) I discovered the card was a 956C doh! - better since all termination > settings are software settable > b) we found an excellent PDF manual online - still referring to support for > OS/2 AND quite detailed > and yet > c) we still couldn't get the connection right: either the card was not found > by the BIOS and the machine tried to boot from a floppy or CD (the hard drive > is on the same card) OR the settings stumped the card and it refused to allow > the boot process to go any further > SNIP ---------------------------------------------------------------------------------- **= Email 6 ==========================** Date: Wed, 14 Jan 2004 10:59:55 +1100 (EST) From: voytek at sbt dot net dot au Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card > Having had some painful experiences with a similiarly configured Adaptec > AHA2940UW, you cannot connect devices to all 3 connectors simultaneously. > You mention you couldn't get the connection right, I suspect the above > is why. if you want to connect to *all* *three*, you need UW2940UWP ---------------------------------------------------------------------------------- **= Email 7 ==========================** Date: Tue, 13 Jan 2004 18:57:03 -0500 From: "Mark Dodel" Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card In <40044ECA.C8E76B37 at bigpond dot net dot au>, on 01/14/04 at 07:02 AM, Ed Durrant said: >Hi John, > I don't hold out much hope of you finding a new SCSI based flatbed >scanner with adaptec card nowadays, they're almost all USB attached now. Not with a card or cable maybe, but HP still has a SCSI scanjet available - 7450c though it is pricey at a list of $699 USD. It is also USB. I wonder if CopyShop/2 would work with this scanner? Eventually I will have to replace my HP 5P and I will greatly miss being able to use CS/2. Mark -- From the eComStation Desktop of: Mark Dodel Warpstock 2003 - See the video and presentations: http://www.warpstock dot org For a choice in the future of personal computing, Join VOICE - http://www.os2voice dot org "The liberty of a democracy is not safe if the people tolerate the growth of private power to a point where it becomes stronger than their democratic State itself. That in it's essence, is Fascism - ownership of government by an individual, by a group or by any controlling private power." Franklin Delano Roosevelt, Message proposing the Monopoly Investigation, 1938 ---------------------------------------------------------------------------------- **= Email 8 ==========================** Date: Wed, 14 Jan 2004 02:08:06 +0100 From: Kris Steenhaut Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card Mark Dodel schreef: >Not with a card or cable maybe, but HP still has a SCSI scanjet available >- 7450c though it is pricey at a list of $699 USD. It is also USB. I >wonder if CopyShop/2 would work with this scanner? > > No way, as the 7450 isn't a HP but an Avision in disguise. Have a look at: http://www.sane-project dot org/lists/sane-mfgs-cvs.html -- Groeten uit Gent, Kris ---------------------------------------------------------------------------------- **= Email 9 ==========================** Date: Tue, 13 Jan 2004 22:06:01 -0500 From: "Mark Dodel" Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card In <40049676.9040807 at hccnet.nl>, on 01/14/04 at 02:08 AM, Kris Steenhaut said: >Mark Dodel schreef: >>Not with a card or cable maybe, but HP still has a SCSI scanjet available >>- 7450c though it is pricey at a list of $699 USD. It is also USB. I >>wonder if CopyShop/2 would work with this scanner? >> >> >No way, as the 7450 isn't a HP but an Avision in disguise. Have a look >at: >http://www.sane-project dot org/lists/sane-mfgs-cvs.html Sigh. That's a damn shame. All that money and its not a real scanjet. Mark -- From the eComStation Desktop of: Mark Dodel Warpstock 2003 - See the video and presentations: http://www.warpstock dot org For a choice in the future of personal computing, Join VOICE - http://www.os2voice dot org "The liberty of a democracy is not safe if the people tolerate the growth of private power to a point where it becomes stronger than their democratic State itself. That in it's essence, is Fascism - ownership of government by an individual, by a group or by any controlling private power." Franklin Delano Roosevelt, Message proposing the Monopoly Investigation, 1938 ---------------------------------------------------------------------------------- **= Email 10 ==========================** Date: Wed, 14 Jan 2004 15:02:30 +1100 (AEDT) From: "John Angelico" Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card On Wed, 14 Jan 2004 10:38:48 +1100, Daryl Pilkington wrote: > >Having had some painful experiences with a similiarly configured Adaptec >AHA2940UW, you cannot connect devices to all 3 connectors simultaneously. >You mention you couldn't get the connection right, I suspect the above >is why. Hi Daryl, sorry to put you to that fiddly typing of the diagram but the detailed and excellent manual explained all that. No we only have one device on the card - 36Gb Seagate hard drive, so adding one external device stayed within the limitations. Best regards John Angelico OS/2 SIG os2 at melbpc dot org dot au or talldad at kepl dot com dot au ___________________ PMTagline v1.50 - Copyright, 1996-1997, Stephen Berg and John Angelico .... Nobody notices when things go right. ---------------------------------------------------------------------------------- **= Email 11 ==========================** Date: Wed, 14 Jan 2004 15:23:26 +1100 From: Daryl Pilkington Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card Hi John, I had this diagram floating around from a previous project. Its good to know that you weren't using all 3 connectors. What sort of cable are you using to connect the MFS-8000SP to the BT-956C? I'm assuming you have a Honda 68 connector for the BT-956C end & Centronics 50 for the MFS-8000SP end? Is the HDD 68pin or 50pin SCSI? John Angelico wrote: > On Wed, 14 Jan 2004 10:38:48 +1100, Daryl Pilkington wrote: > > >>Having had some painful experiences with a similiarly configured Adaptec >>AHA2940UW, you cannot connect devices to all 3 connectors simultaneously. >>You mention you couldn't get the connection right, I suspect the above >>is why. > > > Hi Daryl, sorry to put you to that fiddly typing of the diagram but the > detailed and excellent manual explained all that. > > No we only have one device on the card - 36Gb Seagate hard drive, so adding > one external device stayed within the limitations. > ---------------------------------------------------------------------------------- **= Email 12 ==========================** Date: Wed, 14 Jan 2004 16:28:32 +1100 (AEDT) From: "John Angelico" Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card On Wed, 14 Jan 2004 15:23:26 +1100, Daryl Pilkington wrote: >Hi John, >I had this diagram floating around from a previous project. >Its good to know that you weren't using all 3 connectors. >What sort of cable are you using to connect the MFS-8000SP to the BT-956C? >I'm assuming you have a Honda 68 connector for the BT-956C end & >Centronics 50 for the MFS-8000SP end? >Is the HDD 68pin or 50pin SCSI? > Daryl, it's a fat cable 68 to Centronics yes. And I have a terminator Centronics-Centronics that can be plugged in at the scanner end of the cable (b/w scanner and cable). The HDD is actually an 80pin unit and I had to spend over $50 on a special cable to go 80 to 68 to fit the card. The only other alternative was to spend over $100 for a new card with an 80-pin connector. Best regards John Angelico OS/2 SIG os2 at melbpc dot org dot au or talldad at kepl dot com dot au ___________________ PMTagline v1.50 - Copyright, 1996-1997, Stephen Berg and John Angelico .... Press any key to continue or any other key to quit ---------------------------------------------------------------------------------- **= Email 13 ==========================** Date: Wed, 14 Jan 2004 17:34:03 +1100 From: Ed Durrant Subject: Re: OpenOffice v1.1 for OS/2 & eCS I wouldn't hold your breath for Smartsuite import filters ! It wont get any. You'll have to to export your Smartsuite documents into a format that Open Office supports and then read them in that way and then save in whichever format you want. Cheers/2 Ed. David Shearer wrote: > I especially like the "save to PDF" option - I have tried it on a basic Word document and it worked really well. > Sure the system is a bit slow to load but so was Staroffice 5.1 as I recall. I run it on eCs 1.1 and a P3 > 450mhz. > > It probably also needs import filters for Smartsuite documents as well - but it has excellent Excel and Word > support. > > David ---------------------------------------------------------------------------------- **= Email 14 ==========================** Date: Wed, 14 Jan 2004 09:18:50 +0100 From: Kris Steenhaut Subject: Re: SCSI Scanner on BT-946C SCSI card s/be 956C card Mark Dodel schreef: >In <40049676.9040807 at hccnet.nl>, on 01/14/04 at 02:08 AM, > Kris Steenhaut said: > > > >>Mark Dodel schreef: >> >> > > > >>>Not with a card or cable maybe, but HP still has a SCSI scanjet available >>>- 7450c though it is pricey at a list of $699 USD. It is also USB. I >>>wonder if CopyShop/2 would work with this scanner? >>> >>> >>> >>> >>No way, as the 7450 isn't a HP but an Avision in disguise. Have a look >>at: >> >> > > > >>http://www.sane-project dot org/lists/sane-mfgs-cvs.html >> >> > > >Sigh. That's a damn shame. All that money and its not a real scanjet. > > > > "Scanjet" is a thing of the past. You know, HP isn't HP anymore but ComPaq-HP, and the new firm just kept the "HP" for keaping appearances. -- Groeten uit Gent, Kris ----------------------------------------------------------------------------------