From: Digest To: "OS/2GenAu Digest" Date: Wed, 7 Apr 2004 00:01:03 EST-10EDT,10,-1,0,7200,3,-1,0,7200,3600 Subject: [os2genau_digest] No. 828 Reply-To: X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Tuesday 06 April 2004 Number 828 ************************************************** Subjects for today 1 Re: Advice re Boot Managers : Kev 2 The Graham Utilities for OS/2 and Windows, V3 : Chris Graham [WarpSpeed]" **= Email 1 ==========================** Date: Tue, 06 Apr 2004 23:43:07 +0000 From: Kev Subject: Re: Advice re Boot Managers David Shearer wrote: >I have recently been dabbling with Linux again - especially since I had to replace my 20G drive with an 80G >drive - the 20G suddenly failed - it was only 2 yrs old what a bugger!! I also run WinXP and eCs (I use eCs >about 90% of the time). > >I have been looking around for a decent boot manager. I tried grub which was installed from the Linux fedora >distro, but when i dabbled with LVM in eCs it stuffed it up. > >I am now trying Airboot. It is fine and allows me to boot all os's. > >Does anyone use a different one or can recommend one to try? > >David > >PS I have used system commander 3.0 and 4.0 but they dont recognise my large drive properly now. IBM >Boot manager is boring. > > > > > > > David, I used air-boot and found it quite stable and compatible. In fact I had no failures with it. However, I had no failures with IBM's boot manager either, so that's where I stayed. Why not stick with the one you know best. You can (or at least I do) have a native DOS boot, a Wintendo 98 boot, a Linux boot and 2 eCS boots currently all booting happily from IBM's Boot Manager. And of course there's still room for one more OS requiring a primary partition to boot from. Remember, only DOS and Wintendo need primary partitions, plus the one more for BootManager. I always boot eCS and Linux from logical drives. In fact in my current setup they're both booting from logical drives on my second physical drive. As for Linux, I'd STRONGLY recommend Mandrake if you're not overly confident, or if you're as dopey as me, get a foot hold on Linux with Lindows (www.lindows dot com) and then move up to Mandrake. Mandrake installs LiLo by default (which I find quite acceptable, despite much advice to the contrary), but it asks if you want it placed in the MBR or in your Linux boot partition. Thus far I've stuck with it in the Linux boot partition, but I'm going to give it a go one day in the MBR, which will dispence with the need for BootManager. Keep playing with Linux - it's worth it. I found eCSv1.1 to be hideously incompatible with my hardware (no video, sound or nic drivers) and many instabilities and inconsistencies. (And I used OS/2 cum eCS for 9 years). By starting with Lindows I now find myself becoming quite comfortable with (Mandrake) Linux and it autodetects and supports ALL my hardware (both old and new) right from initial install. I'd rank Mandrake at least as easy an install as Wintendo, and MUCH easier than eCSv1.1. Any'ow, good luck with it all Kev Downes ---------------------------------------------------------------------------------- **= Email 2 ==========================** Date: Tue, 06 Apr 2004 23:52:10 +1000 (EST) From: "Chris Graham [WarpSpeed]" Subject: The Graham Utilities for OS/2 and Windows, V3 I've put together a little survey on the possibility of me producting a Version 3 of my utilities for both OS/2 and Windows. I would greatly appreciate any comments that anyone would like to share with me. It is totally anonymous. If you want to ask further questions, then please email me. Please feel free to forward this email to any other OS/2 lists that I am not aware of. If you would like to participate, then please visit: http://www.warpspeed dot com dot au/survey/survey.htm Thanks! -Chris WarpSpeed Computers - The Graham Utilities for OS/2. Voice: +61-3-9307-0344 Internet: chrisg at warpspeed dot com dot au FAX: +61-3-9307-0633 Web Page: http://www.warpspeed dot com dot au Postal: WarpSpeed Computers, PO Box 212, Brunswick, VIC 3056, AUSTRALIA ----------------------------------------------------------------------------------