From: Digest To: "OS/2GenAu Digest" Date: Sun, 5 Dec 2004 00:01:08 EST-10EDT,10,-1,0,7200,3,-1,0,7200,3600 Subject: [os2genau_digest] No. 994 Reply-To: X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Saturday 04 December 2004 Number 994 ************************************************** Subjects for today 1 ECD's? : Gavin Miller 2 Re: ECD's? : Ed Durrant 3 Re: ECD's? : Kev 4 Re: Xworkplace : Kev 5 Re: Xworkplace : Paul Smedley 6 Re: ECD's? : Kev 7 Re: Xworkplace : Kev 8 Re: Xworkplace : Ed Durrant 9 Re: ECD's? : Ed Durrant 10 Re: ECD's? : Paul Smedley 11 Re: ECD's? : Kev 12 Re: ECD's? : Paul Smedley 13 Re: ECD's? : Kev 14 Re: ECD's? : Paul Smedley 15 Re: ECD's? : Kev 16 Re: ECD's? : Paul Smedley **= Email 1 ==========================** Date: Sat, 04 Dec 2004 06:36:33 +1100 From: Gavin Miller Subject: ECD's? Hi All, Does anyone know how to read enhanced CD's in OS/2? I'm sure I could many moons ago, but have forgotten how since the move to Ecs. Cheers G ---------------------------------------------------------------------------------- **= Email 2 ==========================** Date: Sat, 04 Dec 2004 12:03:47 +1100 From: Ed Durrant Subject: Re: ECD's? are you using JJSCDROM ? Cheers/2 Ed. Gavin Miller wrote: > Hi All, > > Does anyone know how to read enhanced CD's in OS/2? I'm sure I could > many moons ago, but have forgotten how since the move to Ecs. > > Cheers > G > ---------------------------------------------------------------------------------- **= Email 3 ==========================** Date: Sat, 04 Dec 2004 12:46:46 +0800 From: Kev Subject: Re: ECD's? What are ECDs?? That is, what makes an enhanced CD different from any other? This is new to me. Cheers Kev Downes Ed Durrant wrote: > are you using JJSCDROM ? > > Cheers/2 > > Ed. > > Gavin Miller wrote: > > >>Hi All, >> >>Does anyone know how to read enhanced CD's in OS/2? I'm sure I could >>many moons ago, but have forgotten how since the move to Ecs. >> >>Cheers >>G >> > > > > > > ---------------------------------------------------------------------------------- **= Email 4 ==========================** Date: Sat, 04 Dec 2004 12:53:16 +0800 From: Kev Subject: Re: Xworkplace Hi Ed Better late than never I s'pose, picking up this again. I guess what I want to know then is, can I install Xworkplace 1.0.2 straight into eCS v1.2. I find the Yahoo groups very hard to navigate, and have never had any success getting listed in any of the groups. It's probably all my fault, but I do stress from time to time that I'm a real dummy. That gives you some slight idea just how dumb!! Thanx Kev Ed Durrant wrote: > Hi Kev, Are you sure that what's installed is a cut-down version of xWorkplace ? I > remember this conversation on the yahoogroups ecomstation list and I'm pretty sure > there's some difference now in what is installed - ie specific modifications for > eComStation. > > Perhaps you could go to yahoogroups and search the ecomstation list, there was quite a > long thread on it as far as I can remember. > > Cheers/2 > > Ed. > > Kev wrote: > > >>Hi one (and all) >> >>I currently have eCS 1.2 installed with the default desktop enhancements >>installed (ie the cut down Xworkplace). >> >>Does anyone know if I must do anything special to install the full >>Xworkplace, or can I simply install over the top of what's already there? >> >>The latest Xworkplace is 1.0.2 I believe. >> >>Thanx in advance >>Kev >> > > > > > > ---------------------------------------------------------------------------------- **= Email 5 ==========================** Date: Sat, 04 Dec 2004 15:33:50 +1030 From: Paul Smedley Subject: Re: Xworkplace Hi Kev, Kev wrote: > Hi Ed > > Better late than never I s'pose, picking up this again. I guess what I > want to know then is, can I install Xworkplace 1.0.2 straight into eCS > v1.2. AFAIK - you should deinstall eWorkPlace first by running x:\ecs\system\ewps\install\deinst.cmd Cheers, Paul. ---------------------------------------------------------------------------------- **= Email 6 ==========================** Date: Sat, 04 Dec 2004 13:07:21 +0800 From: Kev Subject: Re: ECD's? While on the subject of CDs, does anyone know if the latest version of RSJ can write .ISOs to CD? I have Tonigy which makes a mockery of making .ISOs to start with, but can I use RSJ to write an.ISO to CD? I've downloaded a couple of Libranet .ISOs and want to be able to make up the CDs without having to use either Wintendo or Linux. I have registered RSJ, but find setting up CDRecord too difficult and confusing. I've loved life since the development of WarpIn, and can't wait for ALL eCS software come that way. Hey, there's a project for one of you budding techos out there. Bundle up all the requirements for CDrecord and make a .WPI distro. And while you're at it, add in CDBoot as well. I'm getting off topic a bit here, but that would be a REALLY useful thing for someone to do. Make .WPI distros of all sorts of software out there for we non-technical dummies. I'm sure it would go part of the way to keeping loyal users for a bit longer. Any'ow, back off the soap box. Thanx all (and one!) Kev Gavin Miller wrote: > Hi All, > > Does anyone know how to read enhanced CD's in OS/2? I'm sure I could > many moons ago, but have forgotten how since the move to Ecs. > > Cheers > G > > > > > ---------------------------------------------------------------------------------- **= Email 7 ==========================** Date: Sat, 04 Dec 2004 13:18:26 +0800 From: Kev Subject: Re: Xworkplace Thanx Paul Can anyone confirm that for me? I don't want to destroy my current of eCS if I don't have to. Thanx again Kev Paul Smedley wrote: > Hi Kev, > > Kev wrote: > >> Hi Ed >> >> Better late than never I s'pose, picking up this again. I guess what >> I want to know then is, can I install Xworkplace 1.0.2 straight into >> eCS v1.2. > > > AFAIK - you should deinstall eWorkPlace first by running > x:\ecs\system\ewps\install\deinst.cmd > > Cheers, > > Paul. > > > > > ---------------------------------------------------------------------------------- **= Email 8 ==========================** Date: Sat, 04 Dec 2004 17:15:59 +1100 From: Ed Durrant Subject: Re: Xworkplace Sorry Kev, I haven't installed XWorkplace, I only remembered the conversations about some complications of doing this on the eComStation list. Does anyone else on this list remember what was said ?? Cheers/2 Ed. Kev wrote: > Hi Ed > > Better late than never I s'pose, picking up this again. I guess what I > want to know then is, can I install Xworkplace 1.0.2 straight into eCS > v1.2. > > I find the Yahoo groups very hard to navigate, and have never had any > success getting listed in any of the groups. It's probably all my > fault, but I do stress from time to time that I'm a real dummy. That > gives you some slight idea just how dumb!! > > Thanx > Kev > > Ed Durrant wrote: > > Hi Kev, Are you sure that what's installed is a cut-down version of xWorkplace ? I > > remember this conversation on the yahoogroups ecomstation list and I'm pretty sure > > there's some difference now in what is installed - ie specific modifications for > > eComStation. > > > > Perhaps you could go to yahoogroups and search the ecomstation list, there was quite a > > long thread on it as far as I can remember. > > > > Cheers/2 > > > > Ed. > > > > Kev wrote: > > > > > >>Hi one (and all) > >> > >>I currently have eCS 1.2 installed with the default desktop enhancements > >>installed (ie the cut down Xworkplace). > >> > >>Does anyone know if I must do anything special to install the full > >>Xworkplace, or can I simply install over the top of what's already there? > >> > >>The latest Xworkplace is 1.0.2 I believe. > >> > >>Thanx in advance > >>Kev > > >> > > > > > > > > > > > > > > > > ---------------------------------------------------------------------------------- **= Email 9 ==========================** Date: Sat, 04 Dec 2004 17:19:24 +1100 From: Ed Durrant Subject: Re: ECD's? Kev wrote: > While on the subject of CDs, does anyone know if the latest version of > RSJ can write .ISOs to CD? I have Tonigy which makes a mockery of > making .ISOs to start with, but can I use RSJ to write an.ISO to CD? > I've downloaded a couple of Libranet .ISOs and want to be able to make > up the CDs without having to use either Wintendo or Linux. > Kev, although I have a full copy of RSJ and I think it will indeed do what you ask, I use the following programs as my preference: MKISOFS - for making ISO images of CDs or DVDs CDRecord2 - to write CD-Rs DVDDAO - to write DVD-Rs The first two wrapped up with Audio-CD Creator to make them EXTREMELY easy to use. All of the above are freeware. Cheers/2 Ed. ---------------------------------------------------------------------------------- **= Email 10 ==========================** Date: Sat, 04 Dec 2004 17:02:07 +1030 From: Paul Smedley Subject: Re: ECD's? Hi Kev, Kev wrote: > While on the subject of CDs, does anyone know if the latest version of > RSJ can write .ISOs to CD? I have Tonigy which makes a mockery of > making .ISOs to start with, but can I use RSJ to write an.ISO to CD? > I've downloaded a couple of Libranet .ISOs and want to be able to make > up the CDs without having to use either Wintendo or Linux. Open CD View -> CD Recorder - drag drop ISO onto the recorder, click record, cick finalise - done. Cheers, Paul. ---------------------------------------------------------------------------------- **= Email 11 ==========================** Date: Sat, 04 Dec 2004 14:55:05 +0800 From: Kev Subject: Re: ECD's? Hi Paul Paul Smedley wrote: > Open CD View -> CD Recorder - drag drop ISO onto the recorder, click > record, cick finalise - done. So do I just drag and drop the .ISO file from the eCS Drives folder onto the opened RSJ CDRecorder? Kev ---------------------------------------------------------------------------------- **= Email 12 ==========================** Date: Sat, 04 Dec 2004 17:56:09 +1030 From: Paul Smedley Subject: Re: ECD's? Hi Kev, Kev wrote: > Hi Paul > > Paul Smedley wrote: > >> Open CD View -> CD Recorder - drag drop ISO onto the recorder, click >> record, cick finalise - done. > > > So do I just drag and drop the .ISO file from the eCS Drives folder onto > the opened RSJ CDRecorder? Yep - same as if you were dragging a wav file. Note this is covered under FAQ in the manual for v5.05 Cheers, Paul. ---------------------------------------------------------------------------------- **= Email 13 ==========================** Date: Sat, 04 Dec 2004 16:11:49 +0800 From: Kev Subject: Re: ECD's? Hi Paul Paul Smedley wrote: > Yep - same as if you were dragging a wav file. Note this is covered > under FAQ in the manual for v5.05 Oh wow!! How easy is that?? It took me a while to find the manual, but I eventually downloaded the .PDF and now have an object for it in my RSJ folder. In the afforementioned FAQ it says, "... This procedure is the same as with WAV and other audio files." Does the "... other audio files." also refer to .MP3s? That is, can I drag an .MP3 to the CD Recorder and it will copy as an audio CD track? So far I can't make it so, but I may be doing it wrong Cheers Kev ---------------------------------------------------------------------------------- **= Email 14 ==========================** Date: Sat, 04 Dec 2004 18:49:28 +1030 From: Paul Smedley Subject: Re: ECD's? Hi Kev, Kev wrote: > Paul Smedley wrote: > >> Yep - same as if you were dragging a wav file. Note this is covered >> under FAQ in the manual for v5.05 > > Oh wow!! How easy is that?? It took me a while to find the manual, but > I eventually downloaded the .PDF and now have an object for it in my RSJ > folder. I got an icon for the PDF when I installed... > In the afforementioned FAQ it says, > "... This procedure is the same as with WAV and other audio files." > > Does the "... other audio files." also refer to .MP3s? That is, can I > drag an .MP3 to the CD Recorder and it will copy as an audio CD track? > So far I can't make it so, but I may be doing it wrong v5.5x can handle .ogg files - don't think it can do mp3... Cheers, Paul. ---------------------------------------------------------------------------------- **= Email 15 ==========================** Date: Sat, 04 Dec 2004 16:41:45 +0800 From: Kev Subject: Re: ECD's? Paul Smedley wrote: > I got an icon for the PDF when I installed... I didn't! > v5.5x can handle .ogg files - don't think it can do mp3... OK. I have v5.52 and it does .OGGs but not MP3s. Do you know how to use Chris Wohlgemuth's CWMM classes to make the WPS play .MP3. I was pondering whether or not RSJ would convert any sound format recognized by the WPS. You already know how thick I am, so it needs to be easy. Thanks again Kev ---------------------------------------------------------------------------------- **= Email 16 ==========================** Date: Sat, 04 Dec 2004 19:40:51 +1030 From: Paul Smedley Subject: Re: ECD's? Hi Kev, Kev wrote: > > > Paul Smedley wrote: >> v5.5x can handle .ogg files - don't think it can do mp3... > > OK. I have v5.52 and it does .OGGs but not MP3s. Do you know how to > use Chris Wohlgemuth's CWMM classes to make the WPS play .MP3. I was > pondering whether or not RSJ would convert any sound format recognized > by the WPS. You already know how thick I am, so it needs to be easy. You need the package from http://www.math.berkeley.edu/~roconnor/ in order to have the wps play mp3's. Not sure - but don't think this helps you with RSJ... Cheers, Paul. ----------------------------------------------------------------------------------