From: Digest To: "OS/2GenAu Digest" Date: Tue, 28 Jun 2005 00:02:05 EST-10EDT,10,-1,0,7200,3,-1,0,7200,3600 Subject: [os2genau_digest] No. 1132 Reply-To: X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Monday 27 June 2005 Number 1132 ************************************************** Subjects for today 1 Re: Partition corruption : Ian Manners" 2 Re: [Fwd: Request for testers with USB Scanners] : Dennis Nolan 3 Re: [Fwd: Request for testers with USB Scanners] : Mike O'Connor" 4 Re: [Fwd: Request for testers with USB Scanners] : Dennis Nolan **= Email 1 ==========================** Date: Mon, 27 Jun 2005 02:23:51 +1000 (EST) From: "Ian Manners" Subject: Re: Partition corruption Hi Alan > Re: PMMERGE.dll > Creation date 1/12/04 > Time: 10:39:56 > Size: 1,269,677 bytes I would say you have >Good = 16/07/03 18:51 1269677 0 PMMERGE_DLL.BAK I suspect your problem isnt PMMERGE as your not using the BAD version from FP5. > I have reinstalled eCS from an image since my recent troubles and hence > the time problems with my Emails. I don't think the time statement in > config.sys was altered in this image and I have lost the alteration I > should make to correct matters. Could you advise what it should be. I use SET TZ=EST-10EDT,10,-1,0,7200,3,-1,0,7200,3600 but everytime I post it Chris tells me off for doing it wrong, or was that just the olympics year he didnt like it :) This ones for Melbourne > Incidently, tonight Mozilla mail froze when I tried to start it so I > had to reboot and again the system wouldn't boot and HD 1 couldn't be > seen. Nor could I boot my floppy version of DFSee. I disconnected > everything and set up the PC on a table where I could check it and it > booted correctly. I then tried the previous Primary disk but it wasn't > recognized so the partition tables are definitely corrupted. > Why is this problem recurring? Till recently it's been a reliable system. I would consider running LVM /NEWMBR to replace your Master Boot Record. Then reboot, and run LVM from the prompt, click on each partition, then exit with a save. Failing that, start to learn more about DFSEE if your systems not backed up. Could also be the first signs of a harddisk on the wayout, or a RAM error, its hard to put your finger on the actual problem without having a real good look at it. Cheers Ian Manners http://www.os2site dot com/ Resistence is useless!!(if less than 1 ohm). ---------------------------------------------------------------------------------- **= Email 2 ==========================** Date: Mon, 27 Jun 2005 17:15:59 +1000 From: Dennis Nolan Subject: Re: [Fwd: Request for testers with USB Scanners] Paul I just get "The system can't find the file LIBC06B4" Any idea where I can get it? -- Howard's "Fair Dismissal" means it's fair for sleaze-bag bosses to sack anyone who rejects their sleazy gropings. How will you explain that to your daughter. Dennis Nolan ETU Shopsteward. ---------------------------------------------------------------------------------- **= Email 3 ==========================** Date: Mon, 27 Jun 2005 18:15:57 +1000 From: "Mike O'Connor" Subject: Re: [Fwd: Request for testers with USB Scanners] Dennis Nolan wrote: > Paul > I just get "The system can't find the file LIBC06B4" > > Any idea where I can get it? Hi Dennis, Here: libc06b4.dll from ftp://ftp dot netlabs dot org/pub/wvgui/libc06b4.zip -- Regards, Mike Failed the exam for -------------------- MCSE - Minesweeper Consultant and Solitaire Expert -------------------- [Please ZIP any attachments, other than GIF/JPG or plain-text] ---------------------------------------------------------------------------------- **= Email 4 ==========================** Date: Mon, 27 Jun 2005 18:48:03 +1000 From: Dennis Nolan Subject: Re: [Fwd: Request for testers with USB Scanners] Eureka Scanner Epson Perfection 4870 Photo Result dump This is sane-find-scanner from sane-backends 1.0.15 searching for SCSI scanners: checking b0t0l0... open ok inquiry for device b0t0l0 failed (Error during device I/O) checking b0t1l0... open ok found SCSI CD-drive "HL-DT-ST DVDRAM GSA-4120B A102" at b0t1l0 checking b0t2l0... open ok found SCSI CD-drive "LITEON CD-ROM LTN526D 9S01" at b0t2l0 checking b0t3l0... open ok inquiry for device b0t3l0 failed (Error during device I/O) checking b0t4l0... open ok inquiry for device b0t4l0 failed (Error during device I/O) checking b0t5l0... open ok inquiry for device b0t5l0 failed (Error during device I/O) checking b0t6l0... open ok inquiry for device b0t6l0 failed (Error during device I/O) checking b0t7l0... open ok inquiry for device b0t7l0 failed (Error during device I/O) checking b1t0l0... open ok inquiry for device b1t0l0 failed (Error during device I/O) checking b1t1l0... open ok found SCSI disk "COMPAQ ST34572W 0892" at b1t1l0 checking b1t2l0... open ok inquiry for device b1t2l0 failed (Error during device I/O) checking b1t3l0... open ok inquiry for device b1t3l0 failed (Error during device I/O) checking b1t4l0... open ok inquiry for device b1t4l0 failed (Error during device I/O) checking b1t5l0... open ok inquiry for device b1t5l0 failed (Error during device I/O) checking b1t6l0... open ok inquiry for device b1t6l0 failed (Error during device I/O) checking b1t7l0... open ok inquiry for device b1t7l0 failed (Error during device I/O) checking b2t0l0... open ok inquiry for device b2t0l0 failed (Error during device I/O) checking b2t1l0... open ok inquiry for device b2t1l0 failed (Error during device I/O) checking b2t2l0... open ok inquiry for device b2t2l0 failed (Error during device I/O) checking b2t3l0... open ok inquiry for device b2t3l0 failed (Error during device I/O) checking b2t4l0... open ok inquiry for device b2t4l0 failed (Error during device I/O) checking b2t5l0... open ok inquiry for device b2t5l0 failed (Error during device I/O) checking b2t6l0... open ok inquiry for device b2t6l0 failed (Error during device I/O) checking b2t7l0... open ok inquiry for device b2t7l0 failed (Error during device I/O) checking b3t0l0... open ok inquiry for device b3t0l0 failed (Error during device I/O) checking b3t1l0... open ok inquiry for device b3t1l0 failed (Error during device I/O) checking b3t2l0... open ok inquiry for device b3t2l0 failed (Error during device I/O) checking b3t3l0... open ok inquiry for device b3t3l0 failed (Error during device I/O) checking b3t4l0... open ok inquiry for device b3t4l0 failed (Error during device I/O) checking b3t5l0... open ok inquiry for device b3t5l0 failed (Error during device I/O) checking b3t6l0... open ok inquiry for device b3t6l0 failed (Error during device I/O) checking b3t7l0... open ok inquiry for device b3t7l0 failed (Error during device I/O) # Your SCSI scanner was detected. It may or may not be supported by SANE. Try # scanimage -L and read the backend's manpage. got to usb_init found 3 devices searching for USB scanners: found USB scanner (vendor=0x04b8, product=0x0128) via OS/2 usbcalls libusb not available # Your USB scanner was detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. done -- Howard's "Fair Dismissal" means it's fair for sleaze-bag bosses to sack anyone who rejects their sleazy gropings. How will you explain that to your daughter. Dennis Nolan ETU Shopsteward. ----------------------------------------------------------------------------------