From: Digest To: "OS/2GenAu Digest" Date: Mon, 15 Aug 2005 00:02:09 EST-10EDT,10,-1,0,7200,3,-1,0,7200,3600 Subject: [os2genau_digest] No. 1166 Reply-To: X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Sunday 14 August 2005 Number 1166 ************************************************** Subjects for today 1 Lotus SS 1.7 & Copyshop/2 : Alan Duval 2 Re: Lotus SS 1.7 & Copyshop/2 : David Shearer" 3 Re: Lotus SS 1.7 & Copyshop/2 : Kris Steenhaut 4 Re: Lotus SS 1.7 & Copyshop/2 : Kris Steenhaut 5 Re: Lotus SS 1.7 & Copyshop/2 : Voytek Eymont" 6 Re: Lotus SS 1.7 & Copyshop/2 : Voytek Eymont" 7 Re: Lotus SS 1.7 & Copyshop/2 : David Shearer" 8 Re: Lotus SS 1.7 & Copyshop/2 : Kris Steenhaut 9 Re: Lotus SS 1.7 & Copyshop/2 : Voytek Eymont" 10 Re: Lotus SS 1.7 & Copyshop/2 : Kris Steenhaut 11 Re: Lotus SS 1.7 & Copyshop/2 : Voytek Eymont" **= Email 1 ==========================** Date: Sun, 14 Aug 2005 14:40:19 +0000 From: Alan Duval Subject: Lotus SS 1.7 & Copyshop/2 Hi, Having finally got a new system working with eCs 1.1 on board and most of my applications I find that I am missing Lotus SS 1.72 CD. I have searched everywhere. I know I had it because I have the upgrades for 1.72 on my Applications drive. At the moment I have installed Lotus 1.5 which I also bought. I have a feeling that Lotus SS 1.7 also came with eCS 1.1 but can't see it in the Application disk. Could someone advise me whether this was so?... and if so how it can be installed? I was able to change my AMD 64 processor and MB for an AMD XP 2600 + Gigabyte 7VT600-RZ(-C) MB. I bought a PCI SCSI card as my HP 4P Scanjet previously had an ISA SCSI card. Fortunately a TWAIN driver now allows me to access the scanner via PM View but Copyshop no longer works as it must have a specific HP SCSI driver. Has anyone been able to get COPYSHOP/2 working with a PCI SCSI card? Regards, Alan Duval ---------------------------------------------------------------------------------- **= Email 2 ==========================** Date: Sun, 14 Aug 2005 14:57:21 +1000 (KST) From: "David Shearer" Subject: Re: Lotus SS 1.7 & Copyshop/2 Hi - Copyshop will work - run the install program and select the option for your own SCSI adapter rather than the HP option. It will work so long as you have already loaded your own SCSI driver etc. My version works with Adaptec PCI no problems. David On Sun, 14 Aug 2005 14:40:19 +0000, Alan Duval wrote: >Hi, > >Having finally got a new system working with eCs 1.1 on board and most >of my applications I find that I am missing Lotus SS 1.72 CD. I have >searched everywhere. I know I had it because I have the upgrades for >1.72 on my Applications drive. At the moment I have installed Lotus 1.5 >which I also bought. >I have a feeling that Lotus SS 1.7 also came with eCS 1.1 but can't see >it in the Application disk. Could someone advise me whether this was >so?... and if so how it can be installed? >I was able to change my AMD 64 processor and MB for an AMD XP 2600 + >Gigabyte 7VT600-RZ(-C) MB. >I bought a PCI SCSI card as my HP 4P Scanjet previously had an ISA SCSI >card. Fortunately a TWAIN driver now allows me to access the scanner via >PM View but Copyshop no longer works as it must have a specific HP SCSI >driver. >Has anyone been able to get COPYSHOP/2 working with a PCI SCSI card? > >Regards, > >Alan Duval > ---------------------------------------------------------------------------------- **= Email 3 ==========================** Date: Sun, 14 Aug 2005 10:19:29 +0200 From: Kris Steenhaut Subject: Re: Lotus SS 1.7 & Copyshop/2 Alan Duval schreef: > Hi, > > which I also bought. > I have a feeling that Lotus SS 1.7 also came with eCS 1.1 but can't > see it in the Application disk. Don't think so, unless you've purchased the full packege. > works as it must have a specific HP SCSI driver. It's coming. > Has anyone been able to get COPYSHOP/2 working with a PCI SCSI card? > Sure, it's working even on my laptop with a PCMCIA bustoaster scsi card. -- Groeten uit Gent, Kris http://www.taartenbakkerij dot com/bestanden/warpstock-europe-2005-dresden.jpg http://www.taartenbakkerij dot com/bestanden/zum_weberplatz.jpg ---------------------------------------------------------------------------------- **= Email 4 ==========================** Date: Sun, 14 Aug 2005 10:21:37 +0200 From: Kris Steenhaut Subject: Re: Lotus SS 1.7 & Copyshop/2 David Shearer schreef: >Hi - Copyshop will work - run the install program and select the option for your own SCSI >adapter rather than the HP option. > Do you mean we don't need scanos2.sys ?? -- Groeten uit Gent, Kris http://www.taartenbakkerij dot com/bestanden/warpstock-europe-2005-dresden.jpg http://www.taartenbakkerij dot com/bestanden/zum_weberplatz.jpg ---------------------------------------------------------------------------------- **= Email 5 ==========================** Date: Sun, 14 Aug 2005 19:16:07 +1000 (EST) From: "Voytek Eymont" Subject: Re: Lotus SS 1.7 & Copyshop/2 Alan Duval wrote: > I bought a PCI SCSI card as my HP 4P Scanjet previously had an ISA SCSI > card. Fortunately a TWAIN driver now allows me to access the scanner via PM > View but Copyshop no longer works as it must have a specific HP SCSI > driver. Has anyone been able to get COPYSHOP/2 working with a PCI SCSI > card? CS/2 will work with just about any SCSI card, I have used it with ISA, PCI and PCCard SCSI adapters. It will also work with other than supplied SCSI scanner drivers, I use it with Galleria's driver, and/or another one, I think, the Impos one. -- Voytek ---------------------------------------------------------------------------------- **= Email 6 ==========================** Date: Sun, 14 Aug 2005 19:22:56 +1000 (EST) From: "Voytek Eymont" Subject: Re: Lotus SS 1.7 & Copyshop/2 Kris Steenhaut wrote: > David Shearer schreef: >> Hi - Copyshop will work - run the install program and select the option >> for your own SCSI adapter rather than the HP option. >> > Do you mean we don't need scanos2.sys ?? CopyShop can use (in my exp.) most other scanner drivers whilst CS/2 is probably the best scanning app I;ve used (Paul Balme did a gret job with it), scanos2 is probably the second worst scanner driver I've ever used. in my experience, on just about any system I tried, scanos2 sucks CPU cycles dry. -- Voytek ---------------------------------------------------------------------------------- **= Email 7 ==========================** Date: Sun, 14 Aug 2005 19:23:28 +1000 (KST) From: "David Shearer" Subject: Re: Lotus SS 1.7 & Copyshop/2 No i meant you dont need scanhp1.sys - but rather select scanos2.sys with a "/n" parameter after scanos2.sys it will boot even if the scanner is off. David On Sun, 14 Aug 2005 10:21:37 +0200, Kris Steenhaut wrote: > > >David Shearer schreef: > >>Hi - Copyshop will work - run the install program and select the option for your own SCSI >>adapter rather than the HP option. >> >Do you mean we don't need scanos2.sys ?? > >-- >Groeten uit Gent, > > Kris > >http://www.taartenbakkerij dot com/bestanden/warpstock-europe-2005-dresden.jpg >http://www.taartenbakkerij dot com/bestanden/zum_weberplatz.jpg > > ---------------------------------------------------------------------------------- **= Email 8 ==========================** Date: Sun, 14 Aug 2005 11:41:49 +0200 From: Kris Steenhaut Subject: Re: Lotus SS 1.7 & Copyshop/2 Voytek Eymont schreef: >CopyShop can use (in my exp.) most other scanner drivers >whilst CS/2 is probably the best scanning app I;ve used (Paul Balme did a >gret job with it), > > Although IMHO Impos/2 and Tame/2 are ways better. >scanos2 is probably the second worst scanner driver I've ever used. > >in my experience, on just about any system I tried, scanos2 sucks CPU >cycles dry. > > > scanos2.sys and the matching hpscaner.dll for using some programs in winos2. Ols horses of course. -- Groeten uit Gent, Kris http://www.taartenbakkerij dot com/bestanden/warpstock-europe-2005-dresden.jpg http://www.taartenbakkerij dot com/bestanden/zum_weberplatz.jpg ---------------------------------------------------------------------------------- **= Email 9 ==========================** Date: Sun, 14 Aug 2005 20:09:55 +1000 (EST) From: "Voytek Eymont" Subject: Re: Lotus SS 1.7 & Copyshop/2 Kris Steenhaut wrote: > Voytek Eymont schreef: > > >> CopyShop can use (in my exp.) most other scanner drivers >> whilst CS/2 is probably the best scanning app I;ve used (Paul Balme did >> a gret job with it), >> > Although IMHO Impos/2 and Tame/2 are ways better. I haven't seen Tame/2, but, Impos is totally different purpose than CS/2 like, try scanning 50 pages, both sides, then either print or fax, annotate, store with CS/2, PMfax and ADF it's a child's play ofcourse, doing other work with CS/2 is possible but tedious CS/2 was primary meant for photocopying work, the extra bits'n'pices beyond that came when Paul licenced the Ulead image library and included that in ater CS/2 >> scanos2 is probably the second worst scanner driver I've ever used. >> >> in my experience, on just about any system I tried, scanos2 sucks CPU >> cycles dry. > scanos2.sys and the matching hpscaner.dll for using some programs in > winos2. Ols horses of course. sorry, but the Danmar driver just sucks, it was crap from the day it was compiled, and, Dan Desoto sp? was not interested in fixing it in all fairnes, though, there was one other scanning app, from Canada, the name escapes me right now, that was even bigger crap that the Danmar driver -- Voytek ---------------------------------------------------------------------------------- **= Email 10 ==========================** Date: Sun, 14 Aug 2005 12:46:46 +0200 From: Kris Steenhaut Subject: Re: Lotus SS 1.7 & Copyshop/2 Voytek Eymont schreef: >I haven't seen Tame/2, but, Impos is totally different purpose than CS/2 > >like, try scanning 50 pages, both sides, then either print or fax, >annotate, store > >with CS/2, PMfax and ADF it's a child's play > > > Never succeeded in CS/2 having working with ADF. Care to elaborate a bit on the matter? >ofcourse, doing other work with CS/2 is possible but tedious > > > Herwig Bauernfeind [ (what a name = Bauernfeind = enemy of the countryman :-) ]wrote an excellent rexx command file to launch automated ADF scans with Tame/2 version 1.00. It's indespensable. It's worth the while to try it out. btw: it's now in the middle of the night at yours, isn't it? - (just curious) -- Groeten uit Gent, Kris http://www.taartenbakkerij dot com/bestanden/warpstock-europe-2005-dresden.jpg http://www.taartenbakkerij dot com/bestanden/zum_weberplatz.jpg ---------------------------------------------------------------------------------- **= Email 11 ==========================** Date: Sun, 14 Aug 2005 21:10:24 +1000 (EST) From: "Voytek Eymont" Subject: Re: Lotus SS 1.7 & Copyshop/2 Kris Steenhaut wrote: > Voytek Eymont schreef: > Never succeeded in CS/2 having working with ADF. Care to elaborate a bit > on the matter? I use CS/2 with HP's ADF: IIp+ADF, 3C+ADF it just works > Herwig Bauernfeind [ (what a name = Bauernfeind = enemy of the > countryman :-) ]wrote an excellent rexx command file to launch automated > ADF scans with Tame/2 version 1.00. It's indespensable. > It's worth the while to try it out. it probably would be if I didn't have CS/2 as it is, I don't have Tame nor even Sane... then again, perhaps I had sane since I've started using CopyShop/2...? > btw: it's now in the middle of the night at yours, isn't it? - (just > curious) it's about 9pm your message was dated 'Sun, August 14, 2005 8:46 pm' -- Voytek ----------------------------------------------------------------------------------