From: Digest To: "OS/2GenAu Digest" Date: Fri, 30 Sep 2005 00:02:18 EST-10EDT,10,-1,0,7200,3,-1,0,7200,3600 Subject: [os2genau_digest] No. 1202 Reply-To: X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Thursday 29 September 2005 Number 1202 ************************************************** Subjects for today 1 How many NIC's & TcpBeui : Bruce 1 Re: Booting sequence : Kris Steenhaut 2 Re: Booting sequence : Alan Duval **= Email 1 ==========================** Date: Wed, 28 Sep 2005 22:07:12 +0800 From: Bruce Subject: How many NIC's & TcpBeui Is there anyone in the group here who could tell me how many NIC's OS/2 can use with TcpBeui? In my WSEB box I currently have 4 phyical lan cards. All four NIC's have TPC/IP bound to them and work fine, whilst two NIC's also have netbios and tcpbeui attached. I want to also have both netbios and tcpbeui on the 4th NIC but not the 3rd NIC but I cannot seen to get it to come together. I get NET5 & NET6 errors on bootup. The mapping NIC1 = 0, NIC2 = 2, NIC3 = 4, NIC4 = 5 Following is my attempt to get it to function: [IBMLXCFG] Netbeui_nif = Netbeui.nif Tcpbeui_nif = Tcpbeui.nif Tcpip_nif = Tcpip.nif E100BEO2_nif = e100beO2.nif EL90XIO2_nif = el90xio2.nif NULLNDIS_nif = nullndis.nif Fetnd_nif = Fetnd.nif [NETBIOS] DriverName = netbios$ ADAPTER0 = netbeui$,0 ADAPTER1 = tcpbeui$,1 ADAPTER2 = netbeui$,2 ADAPTER3 = tcpbeui$,3 ADAPTOR5 = netbeui$,5 ADAPTER6 = tcpbeui$,6 DriverName = netbeui$ Bindings = E100BEO2_nif,,EL90XIO2_nif,,Fetnd_nif DriverName = tcpbeui$ Bindings = ,E100BEO2_nif,,EL90XIO2_nif,,Fetnd_nif IBMLAN.INI net1 = NETBEUI$,0,LM10,102,100,21 net2 = TCPBEUI$,1,LM10,102,100,21 net3 = NETBEUI$,2,LM10,102,100,21 net4 = TCPBEUI$,3,LM10,102,100,21 net5 = NETBEUI$,5,LM10,102,100,21 net6 = TCPBEUI$,6,LM10,102,100,21 wrknets = NET1,NET2,NET3,NET4,NET5,NET6 srvnets = NET1,NET2,NET3,NET4,NET5,NET6 ---------------------------------------------------------------------------------- **= Email 1 ==========================** Date: Thu, 29 Sep 2005 01:22:59 +0200 From: Kris Steenhaut Subject: Re: Booting sequence Alan Duval ha scritto: >>> >>> Someone's probably answered this but as I haven't been receiving >>> Email from the os2genau site for weeks I have missed it. Now i'm >>> getting Email again after sorting things out with TPG, so I'll ask >>> it again. >>> >>> When eCs boots does it follow the sequence in config.sys? >>> My reason for asking this is that booting stops after the zip driver >>> (OAD) is loaded until I switch on the zip drive. >> >> >> >> Why are you still using this outdated OAD driver? I've told you to >> use the ppaos2 driver instead (and had sent it to you by private >> mail), didn't I? >> > Hi Kris, > > Yes! you did send it but I lost it when I installed eCs 1.2 recently > on my new PC. > Could you send it again with instructions how to make it the default > Zip driver? > You only have to add: basedev=ppaos2.add to the config , copy the file to \os2\boot and reboot. As easy as that. http://www.taartenbakkerij dot com/bestanden/ppaos2.zip -- Groeten uit Gent, Kris http://www.taartenbakkerij dot com/bestanden/warpstock-europe-2005-dresden.jpg http://www.taartenbakkerij dot com/bestanden/zum_weberplatz.jpg ---------------------------------------------------------------------------------- **= Email 2 ==========================** Date: Thu, 29 Sep 2005 16:10:40 +0000 From: Alan Duval Subject: Re: Booting sequence Kris Steenhaut wrote: >> > You only have to add: > > basedev=ppaos2.add > > to the config , copy the file to > > \os2\boot > > and reboot. As easy as that. > > http://www.taartenbakkerij dot com/bestanden/ppaos2.zip > Hi Kris, Thanks for sending the driver and info. Worked like a charm. Bless you, Alan ----------------------------------------------------------------------------------