From: Digest To: "OS/2GenAu Digest" Date: Tue, 28 Apr 2009 00:01:34 EST-10EDT,10,1,0,7200,4,1,0,7200,3600 Subject: [os2genau_digest] No. 1815 Reply-To: X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Monday 27 April 2009 Number 1815 ************************************************** Subjects for today 1 Fat 32 : Alan Duval 2 Re: Fat 32 : Peter L Allen" 3 Re: Fat 32 : Nicholas Lysaght 4 Re: Fat 32 : Alan Duval 5 Re: Fat 32 : Peter L Allen" 6 Re: Fat 32 : Alan Duval 7 Re: Fat 32 : Chuck McKinnis 8 Re: Fat 32 : Chuck McKinnis 9 Re: Fat 32 : Peter L Allen 10 Re: Fat 32 : Kris Steenhaut 11 Re: Fat 32 : Dennis Nolan 12 FAT 32 : Alan Duval 13 Re: FAT 32 : Kris Steenhaut 14 Re: Fat 32 : Chuck McKinnis **= Email 1 ==========================** Date: Mon, 27 Apr 2009 09:45:37 +1100 From: Alan Duval Subject: Fat 32 Hi, I have an external HD on which I have a Fat 32 and a HPFS partition. I want to read files transfered from WinXP to the Fat 32 partition when I use eCs. However eCs only sees the HPFS partition. I have installed Fat32_0913.wpi from Hobbes but still can't see the Fat 32 partition. What can I do? Regards, Alan Duval -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 2 ==========================** Date: Mon, 27 Apr 2009 10:23:57 +1000 (EST) From: "Peter L Allen" Subject: Re: Fat 32 On Mon, 27 Apr 2009 09:45:37 +1100, Alan Duval wrote: >Hi, > >I have an external HD on which I have a Fat 32 and a HPFS partition. I >want to read files transfered from WinXP to the Fat 32 partition when I >use eCs. However eCs only sees the HPFS partition. I have installed >Fat32_0913.wpi from Hobbes but still can't see the Fat 32 partition. >What can I do? > >Regards, > >Alan Duval >-------------------------------------------------- > > http://www./melbpc/ - The Melbourne OS/2 SIG === > > danidasd.dmd ? allenpl -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 3 ==========================** Date: Mon, 27 Apr 2009 09:43:31 +0800 From: Nicholas Lysaght Subject: Re: Fat 32 [attachments have been removed] -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 4 ==========================** Date: Mon, 27 Apr 2009 12:11:53 +1100 From: Alan Duval Subject: Re: Fat 32 Peter L Allen wrote: > On Mon, 27 Apr 2009 09:45:37 +1100, Alan Duval wrote: > > >> Hi, >> >> I have an external HD on which I have a Fat 32 and a HPFS partition. I >> want to read files transfered from WinXP to the Fat 32 partition when I >> use eCs. However eCs only sees the HPFS partition. I have installed >> Fat32_0913.wpi from Hobbes but still can't see the Fat 32 partition. >> What can I do? >> >> Regards, >> >> Alan Duval >> -------------------------------------------------- >> >> http://www./melbpc/ - The Melbourne OS/2 SIG >=== >> >> >> > danidasd.dmd ? > No! I have the OS2DASD.DMD driver in my config.sys Should I REM this and install DANIDASD.DMD ? If so, are there any other things I should do so that eCS 2.0 will see all the partitions on my HD as well as those on my USB plugged external drive? Regards, Alan -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 5 ==========================** Date: Mon, 27 Apr 2009 13:00:44 +1000 (EST) From: "Peter L Allen" Subject: Re: Fat 32 On Mon, 27 Apr 2009 12:11:53 +1100, Alan Duval wrote: >Peter L Allen wrote: >> On Mon, 27 Apr 2009 09:45:37 +1100, Alan Duval wrote: >> >> >>> Hi, >>> >>> I have an external HD on which I have a Fat 32 and a HPFS partition. I >>> want to read files transfered from WinXP to the Fat 32 partition when I >>> use eCs. However eCs only sees the HPFS partition. I have installed >>> Fat32_0913.wpi from Hobbes but still can't see the Fat 32 partition. >>> What can I do? >>> >>> Regards, >>> >>> Alan Duval >>> -------------------------------------------------- >>> >>> http://www./melbpc/ - The Melbourne OS/2 SIG === >>> >>> >>> >> danidasd.dmd ? >> >No! I have the OS2DASD.DMD driver in my config.sys > >Should I REM this and install DANIDASD.DMD ? Swat I did, coupla weeks ago, shows how far I am from the cutting edge! - covered in the documentation. BTW I found the presence of the FAT32 stuff to be not entirely benign. OK for disk ops like copy move stuff. On my system e.g. installs showed up some "funnies". Going to set up a boot option for particular use - YMMV, allenpl >If so, are there any other things I should do so that eCS 2.0 will see >all the partitions on my HD as well as those on my USB plugged external >drive? > >Regards, > >Alan > >-------------------------------------------------- > > http://www./melbpc/ - The Melbourne OS/2 SIG === > > -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 6 ==========================** Date: Mon, 27 Apr 2009 13:13:25 +1100 From: Alan Duval Subject: Re: Fat 32 Peter L Allen wrote: > On Mon, 27 Apr 2009 12:11:53 +1100, Alan Duval wrote: > > >> Peter L Allen wrote: >> >>> On Mon, 27 Apr 2009 09:45:37 +1100, Alan Duval wrote: >>> >>> >>> >>>> Hi, >>>> >>>> I have an external HD on which I have a Fat 32 and a HPFS partition. I >>>> want to read files transfered from WinXP to the Fat 32 partition when I >>>> use eCs. However eCs only sees the HPFS partition. I have installed >>>> Fat32_0913.wpi from Hobbes but still can't see the Fat 32 partition. >>>> What can I do? >>>> >>>> Regards, >>>> >>>> Alan Duval >>>> -------------------------------------------------- >>>> >>>> http://www./melbpc/ - The Melbourne OS/2 SIG >=== >>>> >>>> >>>> >>>> >>> danidasd.dmd ? >>> >>> >> No! I have the OS2DASD.DMD driver in my config.sys >> >> Should I REM this and install DANIDASD.DMD ? >> > > Swat I did, coupla weeks ago, shows how far I am from the cutting edge! > - covered in the documentation. > > BTW I found the presence of the FAT32 stuff to be not entirely benign. > OK for disk ops like copy move stuff. > On my system e.g. installs showed up some "funnies". > Going to set up a boot option for particular use - YMMV, > > allenpl > > >> If so, are there any other things I should do so that eCS 2.0 will see >> all the partitions on my HD as well as those on my USB plugged external >> drive? >> I just read the doc with DaniDASD.DMD and she says that it doesn't work with OS2LVM.DMD which I have in the BASEDEV section of my config.sys, as eCS 2.0 was installed to my HD which was formatted with a number of partitions by LVM. Hence I don't think it would be advisable for me to install it. Regards, Alan -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 7 ==========================** Date: Sun, 26 Apr 2009 22:46:05 -0600 From: Chuck McKinnis Subject: Re: Fat 32 Alan Duval wrote: > Hi, > > I have an external HD on which I have a Fat 32 and a HPFS partition. I > want to read files transfered from WinXP to the Fat 32 partition when I > use eCs. However eCs only sees the HPFS partition. I have installed > Fat32_0913.wpi from Hobbes but still can't see the Fat 32 partition. > What can I do? > > Regards, > > Alan Duval > -------------------------------------------------- > > http://www./melbpc/ - The Melbourne OS/2 SIG === > Read the FAT32 documents carefully. The secret is to get the drive set up with a LVM master boot record and partitions (volumes). You can then proceed to get the FAT32 and HPFS volumes formatted. I format both with DFSee, although I have used eCS to format the HPFS and WinXP to format the FAT32. The key is to have the LVM info set up properly. -- Chuck McKinnis 1449 State Highway 14 N Sandia Park, NM 87047 505-286-3191 http://www.7cities dot net/~mckinnis/ To live is Christ, and to die is gain. Philippians 1:21 -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 8 ==========================** Date: Sun, 26 Apr 2009 22:46:34 -0600 From: Chuck McKinnis Subject: Re: Fat 32 Nicholas Lysaght wrote: > [attachments have been removed] > -------------------------------------------------- > > http://www./melbpc/ - The Melbourne OS/2 SIG === > Hope it was not important. :) -- Chuck McKinnis 1449 State Highway 14 N Sandia Park, NM 87047 505-286-3191 http://www.7cities dot net/~mckinnis/ My sheep hear my voice, and I know them, and they follow me: And I give unto them eternal life; and they shall never perish, neither shall any man pluck them out of my hand. John 10:27-28 -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 9 ==========================** Date: Mon, 27 Apr 2009 16:00:02 +1000 From: Peter L Allen Subject: Re: Fat 32 On Monday 27 April 2009 12:13:25 Alan Duval wrote: > Peter L Allen wrote: > > On Mon, 27 Apr 2009 12:11:53 +1100, Alan Duval wrote: > >> Peter L Allen wrote: > >>> On Mon, 27 Apr 2009 09:45:37 +1100, Alan Duval wrote: > >>>> Hi, > >>>> > >>>> I have an external HD on which I have a Fat 32 and a HPFS partition. I > >>>> want to read files transfered from WinXP to the Fat 32 partition when > >>>> I use eCs. However eCs only sees the HPFS partition. I have installed > >>>> Fat32_0913.wpi from Hobbes but still can't see the Fat 32 partition. > >>>> What can I do? > >>>> > >>>> Regards, > >>>> > >>>> Alan Duval > >>>> -------------------------------------------------- > >>>> > >>>> http://www./melbpc/ - The Melbourne OS/2 SIG > >=== > >>> > >>> danidasd.dmd ? > >> > >> No! I have the OS2DASD.DMD driver in my config.sys > >> > >> Should I REM this and install DANIDASD.DMD ? > > > > Swat I did, coupla weeks ago, shows how far I am from the cutting edge! > > - covered in the documentation. > > > > BTW I found the presence of the FAT32 stuff to be not entirely benign. > > OK for disk ops like copy move stuff. > > On my system e.g. installs showed up some "funnies". > > Going to set up a boot option for particular use - YMMV, > > > > allenpl > > > >> If so, are there any other things I should do so that eCS 2.0 will see > >> all the partitions on my HD as well as those on my USB plugged external > >> drive? > > I just read the doc with DaniDASD.DMD and she says that it doesn't work > with OS2LVM.DMD which I have in the BASEDEV section of my config.sys, > as eCS 2.0 was installed to my HD which was formatted with a number of > partitions by LVM. Hence I don't think it would be advisable for me to > install it. > Sent docs back channel. Is there anyway to read docs in a WarpIn package without installing it???? allenpl > Regards, > > Alan > > -------------------------------------------------- > > http://www./melbpc/ - The Melbourne OS/2 SIG === -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 10 ==========================** Date: Mon, 27 Apr 2009 10:59:31 +0200 From: Kris Steenhaut Subject: Re: Fat 32 Alan Duval ha scritto: > No! I have the OS2DASD.DMD driver in my config.sys > > Should I REM this and install DANIDASD.DMD ? > Per carità! ABSOLUTELY NOT!!!!!!!!! -- Groeten uit Gent, Kris -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 11 ==========================** Date: Mon, 27 Apr 2009 19:51:24 +1000 From: Dennis Nolan Subject: Re: Fat 32 I'd be inclined to check out the fat32 driver by trying to read a fat32 formatted memory card. If you can read the card then the driver is ok and you need to look at the hdd area. If you can't read the memory card, then the fat32 driver is the problem. Regards Dennis. Kris Steenhaut wrote: > Alan Duval ha scritto: >> No! I have the OS2DASD.DMD driver in my config.sys >> >> Should I REM this and install DANIDASD.DMD ? >> > Per carità! ABSOLUTELY NOT!!!!!!!!! > -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 12 ==========================** Date: Mon, 27 Apr 2009 20:11:39 +1100 From: Alan Duval Subject: FAT 32 HI, Thanks Peter, Chuck and Kris for your help. I used LVM to give a volume name to the FAT 32 partition and now eCS recognizes it and I can copy files from it. Regards, Alan Duval -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 13 ==========================** Date: Mon, 27 Apr 2009 12:38:07 +0200 From: Kris Steenhaut Subject: Re: FAT 32 Alan Duval ha scritto: > HI, > > Thanks Peter, Chuck and Kris for your help. I used LVM to give a > volume name to the FAT 32 partition and now eCS recognizes it and I > can copy files from it. > Indeed and other than that you can't use danidasd.dmd at all, you can't even think of it. -- Groeten uit Gent, Kris -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 14 ==========================** Date: Mon, 27 Apr 2009 06:54:10 -0600 From: Chuck McKinnis Subject: Re: Fat 32 Peter L Allen wrote: > On Monday 27 April 2009 12:13:25 Alan Duval wrote: >> Peter L Allen wrote: >>> On Mon, 27 Apr 2009 12:11:53 +1100, Alan Duval wrote: >>>> Peter L Allen wrote: >>>>> On Mon, 27 Apr 2009 09:45:37 +1100, Alan Duval wrote: >>>>>> Hi, >>>>>> >>>>>> I have an external HD on which I have a Fat 32 and a HPFS partition. I >>>>>> want to read files transfered from WinXP to the Fat 32 partition when >>>>>> I use eCs. However eCs only sees the HPFS partition. I have installed >>>>>> Fat32_0913.wpi from Hobbes but still can't see the Fat 32 partition. >>>>>> What can I do? >>>>>> >>>>>> Regards, >>>>>> >>>>>> Alan Duval >>>>>> -------------------------------------------------- >>>>>> >>>>>> http://www./melbpc/ - The Melbourne OS/2 SIG >>>=== >>>>> danidasd.dmd ? >>>> No! I have the OS2DASD.DMD driver in my config.sys >>>> >>>> Should I REM this and install DANIDASD.DMD ? >>> Swat I did, coupla weeks ago, shows how far I am from the cutting edge! >>> - covered in the documentation. >>> >>> BTW I found the presence of the FAT32 stuff to be not entirely benign. >>> OK for disk ops like copy move stuff. >>> On my system e.g. installs showed up some "funnies". >>> Going to set up a boot option for particular use - YMMV, >>> >>> allenpl >>> >>>> If so, are there any other things I should do so that eCS 2.0 will see >>>> all the partitions on my HD as well as those on my USB plugged external >>>> drive? >> I just read the doc with DaniDASD.DMD and she says that it doesn't work >> with OS2LVM.DMD which I have in the BASEDEV section of my config.sys, >> as eCS 2.0 was installed to my HD which was formatted with a number of >> partitions by LVM. Hence I don't think it would be advisable for me to >> install it. >> > > Sent docs back channel. > > Is there anyway to read docs in a WarpIn package without installing it???? > > allenpl > >> Regards, >> >> Alan Install WPIView from Herwig Bauernfeind. http://members.aon.at/herwig.bauernfeind/os2.html -- Chuck McKinnis 1449 State Highway 14 N Sandia Park, NM 87047 505-286-3191 http://www.7cities dot net/~mckinnis/ But the meek shall inherit the earth; and shall delight themselves in the abundance of peace. Psalm 37:11 -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG ===