From: Digest To: "OS/2GenAu Digest" Date: Sat, 26 Jun 2010 00:01:04 EST-10EDT,10,1,0,7200,4,1,0,7200,3600 Subject: [os2genau_digest] No. 1975 Reply-To: X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Friday 25 June 2010 Number 1975 ************************************************** Subjects for today 1 Re: No anti-virus software? No internet connection : Paul Smedley 2 Re: eCS 2.0 GA and USB : Peter Moylan 3 Re: eCS 2.0 GA and USB : Ian Manners" 4 Re: eCS 2.0 GA and USB : Ian Manners" 5 Re: eCS 2.0 GA and USB : Mike O'Connor 6 Re: eCS 2.0 GA and USB : Alan Duval 7 Re: eCS 2.0 GA and USB : Kris Steenhaut 8 Re: eCS 2.0 GA and USB : Alan Duval 9 Re: eCS 2.0 GA and USB : Alan Duval 10 Re: eCS 2.0 GA and USB : Alan Duval 11 Re: eCS 2.0 GA and USB : Peter Moylan **= Email 1 ==========================** Date: Thu, 24 Jun 2010 08:42:47 +0845 From: Paul Smedley Subject: Re: No anti-virus software? No internet connection Hi All, Paul Smedley wrote: > Hi Ian, > > On 22/06/10 12:48 PM, Ian Manners wrote: >> >> >> No anti-virus software? No internet >> connection. >> >> > >> ction/story-e6frfro0-1225882656490> >> > >> Where do they get these ideas, and just how many commitees >> has Rudd& Co set up ? And it has taken them a year to come >> up with this ! >> > > I think it's part of Rudd's cunning plan to lose the upcoming election. > With all the unpopular recent policy announcements y > ou'd think he'd start to learn!! With last night's announcement - maybe that will be Gillard going to the next election - not Rudd!! Be interesting to see what policy changes are made assuming Gillard does win.. Interesting times... Cheers, Paul -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 2 ==========================** Date: Fri, 25 Jun 2010 10:45:59 +1000 From: Peter Moylan Subject: Re: eCS 2.0 GA and USB Alan Duval wrote: > I have just installed eCS 2.0 GA to a removable IDE hard drive but > find that it doesn't recognise any USB sticks that I plug in and that > are recognised by eCS 2.0 Silver which I have on another drive. How > do I fix this? > I hadn't even thought of testing this until you said that. Now I realise that something weird is happening. This is with eCS 2.0 GA installable to a fixed IDE hard drive, formatted as bootable JFS. First off, I couldn't find the usual "Refresh removable media" object. Finally located it in the "System Setup" folder, and moved it to the "Drives" folder where I'm used to having it. (The "Drives" folder is easy to find on my eCS toolbar now that I've replaced the stupid default icon by a recognisable "Drives" icon rescued from an old copy of Warp.) (The Warp 3 drives icon is the most readable of all, but I neglected to save it in my icon collection. The Warp 4 one is less clear - it's a diagonal view of a disk, so requires higher resolution to make sense of it - but it's not too bad. The eCS icon seems to have been designed for a 5000x5000 screen resolution.) 1. Plugged in a USB stick that was already formatted as HPFS (Drive I:). Attempted to use "Refresh removable media" a number of times, without any luck. 2. Opened a command line, used the command "lvm /rediscoverprm". It didn't work the first time. Tried again, and it worked the second time. 3. Used the command "eject I:". Waited until the light stopped flickering, then used "lvm /rediscoverprm" several times, none of which worked. 4. Unplugged the USB stick, then plugged it in again. This time the USB stick was discovered without my having to issue any command. Since then, I've been able to get the USB stick recognised by simply plugging it in, without any command. Conclusions: (a) This version of LVM.EXE is buggy. Does anyone know how to submit a bug report? (b) There is a daemon running that discovers removable drives, and once you get it working it keeps working, but it doesn't work initially. I'm not sure whether I got it working by persisting with the LVM command, or simply by plugging and unplugging it enough times. I haven't yet tried rebooting and then plugging in the drive again. I suspect that after a reboot I will again have to try a number of times before the drive is recognised. -- Peter Moylan peter at pmoylan dot org http://www.pmoylan dot org -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 3 ==========================** Date: Fri, 25 Jun 2010 11:02:38 +1000 (EST) From: "Ian Manners" Subject: Re: eCS 2.0 GA and USB Hi Peter, >(a) This version of LVM.EXE is buggy. Does anyone know how to submit a >bug report? I remember someone mentioning that its in the faq file on the first eCS CD. Cheers Ian Manners http://www.os2site dot com/ -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG **= Email 4 ==========================** Date: Fri, 25 Jun 2010 11:14:10 +1000 (EST) From: "Ian Manners" Subject: Re: eCS 2.0 GA and USB Hi Alan, >I have just installed eCS 2.0 GA to a removable IDE hard drive but find >that it doesn't recognise any USB sticks that I plug in and that are >recognised by eCS 2.0 Silver which I have on another drive. >How do I fix this? Dont know if it will fix it but try a manual USB hardware check and install. example [C:\os2\boot]hcimonit.exe You have 1 PCI USB OHCI host controller(s) You have 1 PCI USB EHCI host controller(s) ok, the above tells me I have 1 OHCI and 1 EHCI controller so in the config.sys file I want BASEDEV=USBOHCD.SYS BASEDEV=USBEHCD.SYS BASEDEV=USBD.SYS /REQ:USBOHCD$,USBEHCD$ [then all the other USB stuff] People keep telling me to leave the settings off at the end of BASEDEV=USBD.SYS because it will cause problems or some other voodoo but I have no idea what USB drivers they are using, the IBM readme file information seems to be correct, and it works fine for me. The main HCD drivers and which ones to use are listed below. BASEDEV=USBUHCD.SYS (one copy of this statement for each UHCI controller reported by HCIMONIT) BASEDEV=USBOHCD.SYS (one copy of this statement for each OHCI controller reported by HCIMONIT) BASEDEV=USBEHCD.SYS (one copy of this statement for each EHCI controller reported by HCIMONIT) The full USB setup I use is :- BASEDEV=USBOHCD.SYS BASEDEV=USBEHCD.SYS BASEDEV=USBD.SYS /REQ:USBOHCD$,USBEHCD$ BASEDEV=USBHID.SYS BASEDEV=USBMSD.ADD /FLOPPIES:0 /REMOVABLES:4 DEVICE=D:\APPS\tame\usbresmg.sys but of cause yours will differ depending on devices etc you have. Cheers Ian Manners http://www.os2site dot com/ -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG **= Email 5 ==========================** Date: Fri, 25 Jun 2010 16:44:52 +1000 From: Mike O'Connor Subject: Re: eCS 2.0 GA and USB Ian Manners wrote: > Hi Alan, >> I have just installed eCS 2.0 GA to a removable IDE hard drive but find >> that it doesn't recognise any USB sticks that I plug in and that are >> recognised by eCS 2.0 Silver which I have on another drive. >> How do I fix this? >> > > Dont know if it will fix it but try a manual USB hardware check and > install. > > example > > [C:\os2\boot]hcimonit.exe > You have 1 PCI USB OHCI host controller(s) > You have 1 PCI USB EHCI host controller(s) > > ok, the above tells me I have 1 OHCI and 1 EHCI controller > > so in the config.sys file I want > > BASEDEV=USBOHCD.SYS > BASEDEV=USBEHCD.SYS > BASEDEV=USBD.SYS /REQ:USBOHCD$,USBEHCD$ > [then all the other USB stuff] > > People keep telling me to leave the settings off at the end of > BASEDEV=USBD.SYS because it will cause problems or > some other voodoo but I have no idea what USB drivers they > are using, the IBM readme file information seems to be > correct, and it works fine for me. > > The main HCD drivers and which ones to use are listed below. > BASEDEV=USBUHCD.SYS (one copy of this statement for each UHCI > controller reported by HCIMONIT) > BASEDEV=USBOHCD.SYS (one copy of this statement for each OHCI > controller reported by HCIMONIT) > BASEDEV=USBEHCD.SYS (one copy of this statement for each EHCI > controller reported by HCIMONIT) > > The full USB setup I use is :- > > BASEDEV=USBOHCD.SYS > BASEDEV=USBEHCD.SYS > BASEDEV=USBD.SYS /REQ:USBOHCD$,USBEHCD$ > BASEDEV=USBHID.SYS > BASEDEV=USBMSD.ADD /FLOPPIES:0 /REMOVABLES:4 > DEVICE=D:\APPS\tame\usbresmg.sys > > but of cause yours will differ depending on devices etc you have. > > Cheers > Ian Manners > Hi Ian, Alan, After 5 years of exclusively using eCS2.0 [betaX|RCx], apart from occasionally confirminging/disproving points reported by others about eCS1.2R, I have never in all of that time had the switches on the end of my USBMSD config.sys line. Ditto for any remaining W4FP15+/MCP2 volumes. All of my systems (multi-multi editions on same 250GB HDD) all recognize _all of my USB-flash sticks/SD[HC]-cards etc_., as well as my one 3.5" 15-partition Maxtor 20GB (was a [Very Low Profile] desktop multi-boot - one W2K instance - all others bar 3 JFS data volumes are bootable W4-MCP2-eCS) which is the only 3.5" HDD shallow enough to fit into the bare enclosure, immediately on insertion/attachment, and I haven't used the "Refresh Removable Media" object in years. Probably W4FP16 [non-LVM] or so was the very fastest to mount any USB-MSD media here. Alan, Make sure that you have usbresmg.sys entry in config.sys. Run USBDOCK against your system, and see what hardware it discovers and recognises (or not?)! Regards, Mike -- Failed the exam for -------------------- MCSE - Minesweeper Consultant and Solitaire Expert -------------------- Personal replies to any of : mikeoc (at) internode (dot) on (dot) net mikeoc (at) austarnet (dot) com (dot) au majilok (at) gmail (dot) com [Please ZIP any attachments, other than GIF/JPG or plain-text] If you are missing a response from me - check Tweed Heads WX status at: http://www.bom.gov.au/products/IDR663.loop.shtml#skip -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 6 ==========================** Date: Fri, 25 Jun 2010 11:10:32 +1000 From: Alan Duval Subject: Re: eCS 2.0 GA and USB See results of suggested commands etc. interspersed below Alan Mike O'Connor wrote: > Ian Manners wrote: >> Hi Alan, >>> I have just installed eCS 2.0 GA to a removable IDE hard drive but find >>> that it doesn't recognise any USB sticks that I plug in and that are >>> recognised by eCS 2.0 Silver which I have on another drive. >>> How do I fix this? >>> >> >> Dont know if it will fix it but try a manual USB hardware check and >> install. >> >> example >> >> [C:\os2\boot]hcimonit.exe >> You have 1 PCI USB OHCI host controller(s) >> You have 1 PCI USB EHCI host controller(s) hcimonit.exe gives the following: You have 6 PCI USB UHCI host controller(s) You have 2 PCI USB EHCI host controller(s) >> >> ok, the above tells me I have 1 OHCI and 1 EHCI controller >> >> so in the config.sys file I want >> BASEDEV=USBOHCD.SYS >> BASEDEV=USBEHCD.SYS >> BASEDEV=USBD.SYS /REQ:USBOHCD$,USBEHCD$ >> [then all the other USB stuff] In my config.sys I have: BASEDEV=USBUHCD.SYS (6 times) BASEDEV=USBEHCD.SYS (2 times) BASEDEV=USBD.SYS >> >> People keep telling me to leave the settings off at the end of >> BASEDEV=USBD.SYS because it will cause problems or >> some other voodoo but I have no idea what USB drivers they >> are using, the IBM readme file information seems to be >> correct, and it works fine for me. >> >> The main HCD drivers and which ones to use are listed below. >> BASEDEV=USBUHCD.SYS (one copy of this statement for each UHCI >> controller reported by HCIMONIT) >> BASEDEV=USBOHCD.SYS (one copy of this statement for each OHCI >> controller reported by HCIMONIT) >> BASEDEV=USBEHCD.SYS (one copy of this statement for each EHCI >> controller reported by HCIMONIT) >> >> The full USB setup I use is :- >> >> BASEDEV=USBOHCD.SYS >> BASEDEV=USBEHCD.SYS >> BASEDEV=USBD.SYS /REQ:USBOHCD$,USBEHCD$ >> BASEDEV=USBHID.SYS >> BASEDEV=USBMSD.ADD /FLOPPIES:0 /REMOVABLES:4 >> DEVICE=D:\APPS\tame\usbresmg.sys >> >> but of cause yours will differ depending on devices etc you have. I have: BASEDEV=USBUHCD.SYS (6 times) BASEDEV=USBEHCD.SYS (2 times) BASEDEV=USBD.SYS BASEDEV=USBHID.SYS BASEDEV=USBMSD.ADD /REMOVABLES:8 /FLOPPIES:1 DEVICE=\ecs\boot\USBRESMG.SYS >> >> Cheers >> Ian Manners >> > Hi Ian, Alan, > > After 5 years of exclusively using eCS2.0 [betaX|RCx], apart from > occasionally confirminging/disproving points reported by others about > eCS1.2R, I have never in all of that time had the switches on the end > of my USBMSD config.sys line. > > Ditto for any remaining W4FP15+/MCP2 volumes. > > All of my systems (multi-multi editions on same 250GB HDD) all > recognize _all of my USB-flash sticks/SD[HC]-cards etc_., as well as > my one 3.5" 15-partition Maxtor 20GB (was a [Very Low Profile] desktop > multi-boot - one W2K instance - all others bar 3 JFS data volumes are > bootable W4-MCP2-eCS) which is the only 3.5" HDD shallow enough to fit > into the bare enclosure, immediately on insertion/attachment, and I > haven't used the "Refresh Removable Media" object in years. Probably > W4FP16 [non-LVM] or so was the very fastest to mount any USB-MSD media > here. > > Alan, > > Make sure that you have usbresmg.sys entry in config.sys. > Run USBDOCK against your system, and see what hardware it discovers > and recognises (or not?)! > > Regards, > Mike > USBDOCK run after attaching a USB device, says: "No attached USB devices" -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 7 ==========================** Date: Fri, 25 Jun 2010 13:20:55 +0200 From: Kris Steenhaut Subject: Re: eCS 2.0 GA and USB Alan Duval ha scritto: > > You have 6 PCI USB UHCI host controller(s) > You have 2 PCI USB EHCI host controller(s) > > In my config.sys I have: > > BASEDEV=USBEHCD.SYS (2 times) > Only one single line is allowed for this one. -- Groeten uit Gent, Kris -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 8 ==========================** Date: Fri, 25 Jun 2010 11:59:41 +1000 From: Alan Duval Subject: Re: eCS 2.0 GA and USB Kris Steenhaut wrote: > Alan Duval ha scritto: >> >> You have 6 PCI USB UHCI host controller(s) >> You have 2 PCI USB EHCI host controller(s) >> >> In my config.sys I have: >> >> BASEDEV=USBEHCD.SYS (2 times) >> > Only one single line is allowed for this one. > REM'd out the second line but it made no difference. The second line was put in by the install process. My system has: 8 x USB 2.0/1.1 ports 2 x IEEE 1394a ports 1 x RJ-45 port Should my config.sys show "PCI USB OHCI host controllers" instead of "PCI USB UHCI host controllers" ? I just let the install process choose the controllers. Regards, Alan -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 9 ==========================** Date: Fri, 25 Jun 2010 22:03:38 +1000 From: Alan Duval Subject: Re: eCS 2.0 GA and USB [attachments have been removed] -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 10 ==========================** Date: Fri, 25 Jun 2010 22:26:52 +1000 From: Alan Duval Subject: Re: eCS 2.0 GA and USB Kris Steenhaut wrote: > Alan Duval ha scritto: >> >> You have 6 PCI USB UHCI host controller(s) >> You have 2 PCI USB EHCI host controller(s) >> >> In my config.sys I have: >> >> BASEDEV=USBEHCD.SYS (2 times) >> > Only one single line is allowed for this one. > REM'd out the second line but it made no difference. The second line was put in by the install process. My system has: 8 x USB 2.0/1.1 ports 2 x IEEE 1394a ports 1 x RJ-45 port Should my config.sys show "PCI USB OHCI host controllers" instead of "PCI USB UHCI host controllers" ? I just let the install process choose the controllers. Regards, Alan -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG === **= Email 11 ==========================** Date: Fri, 25 Jun 2010 22:35:56 +1000 From: Peter Moylan Subject: Re: eCS 2.0 GA and USB Ian Manners wrote: > Hi Peter, > > >> (a) This version of LVM.EXE is buggy. Does anyone know how to submit a >> bug report? >> > > I remember someone mentioning that its in the faq file on the first > eCS CD. > Thanks. I found the bug tracker at http://bugs.ecomstation.nl/view_all_bug_page.php (login is necessary). Meanwhile, however, my USB stick is recognised when I plug it in - no LVM call necessary - so there is no longer a bug to report. I'll just have to keep an eye on whether this can be reproduced. I did have a glitch where this drive appeared to be empty, but CHKDSK fixed the problem. -- Peter Moylan peter at pmoylan dot org http://www.pmoylan dot org -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG ===