From: Digest To: "OS/2GenAu Digest" Date: Thu, 6 Jan 2011 00:00:14 EST-10EDT,10,1,0,7200,4,1,0,7200,3600 Subject: [os2genau_digest] No. 2030 Reply-To: X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Wednesday 05 January 2011 Number 2030 ************************************************** Subjects for today 1 Scanner and CopyShop problems : Alan Duval **= Email 1 ==========================** Date: Wed, 05 Jan 2011 23:55:04 +1100 From: Alan Duval Subject: Scanner and CopyShop problems Hi, Had to reinstall ECS 2.0 as when I installed Ubuntu to my second hard drive it wrote Grub2 to the HD that I had ECS on and I couldn't find a way to remove it. With this second installation I am unable to get Tame2 or Copyshop working. I have followed all my written instructions to install Aspirout and modify Config sys and configure Tame2 but on rebooting the boot screen says: SCSI OS/2 version 1.2 ASPI compatible driver Looking for ASPI manager .....Found Number of SCSI host adapters found :1 Host 0: ATA_ATAPI SCSI ID ==> 7 Searching ..... No scanner found Error. Could not find a scanner attached to SCSI bus Driver will not be loaded. What can I do to get ECS to find the scanner? As to CopyShop: I installed it to C: but it installs the SCANHP1.SYS driver and not the SCANOS2.SYS driver which is the one that CopyShop needs. SCANOS2.SYS is in C:\OS2\BOOT as is SCANHP1.SYS and SCANJET.SYS so in Config.sys I put REM in front of the SCANHP1.SYS line and added DEVICE=C:\OS2\BOOT\SCANOS2.SYS but the boot screen says SCANOS2.SYS is not installed. How can I get SCANOS2.SYS installed? Regards, Alan Duval -------------------------------------------------- http://www./melbpc/ - The Melbourne OS/2 SIG ===