From: Digest To: "OS/2GenAu Digest" Date: Thu, 29 Mar 2018 00:00:16 WST-8WST,10,1,0,7200,4,1,0,7200,0 Subject: [os2genau_digest] No. 2136 Reply-To: os2genau_digest at os2site.com X-List-Unsubscribe: www.os2site.com/list/ ************************************************** Wednesday 28 March 2018 Number 2136 ************************************************** Subjects for today 1 Re: Install eco 1.2 fails : **= Email 1 ==========================** Date: Tue, 27 Mar 2018 20:47:55 +0200 From: Subject: Re: Install eco 1.2 fails On 27-03-18 07:04, dennis at jeg-og.com wrote: > Content-Transfer-Encoding: quoted-printable > Content-Type: text/plain; > charset=utf-8 > > Hi everyone > > Well working until 5am. is stupid. I upset the partition structure so = > resorted to running the =E2=80=9CRescue and Recovery=E2=80=9D disks > > That got me nowhere. > dfsee was unable to help > > So finally I tried restoring to factory defaults, XP. That didn=E2=80=99t = > work. > > So having read all the advice I attempted to install ECS v1.2 > I did make a change in the configuration, checked the Stop on error = > item. > > Remarkably it went through to the registration, no USB support at that = > stage so had to enter it by hand, > had a double zero which caused a hiccup > Created a 1000Mb partition and formatted it and went through the reboot. > Then when rebooting the C:\OS2\BOOT\COM.SYS > didn=E2=80=99t load and the system stopped with the dreaded TRAP 000d = > message. > > Any thoughts on how to get past this? Boot from CD ROM and check what driver is after COM.SYS. DId you load with ALT F4 key combination as I described ? Roderick ----------------------------------------------- To Subscribe/Unsubscribe go to =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This is a pulp free product.