Date: Thu, 14 Dec 2006 22:32:26 -0500 From: madodel Subject: [VOICENWS] SW: eComStation 2.0 Beta 3 available ++ From the VOICE OS/2-eCS News Service http://www.os2voice.org ++ From: Joachim Benjamins Posted on the eComStation Yahoo mailing list Available as of today for Software Subscription Services customers via login at Mensys: ( http://www.mensys.net/login ) !Warning the ISO file is slightly larger than 700 MB so could run into trouble on certain CDR media! [ Moderator note: Mensys has since released a slightly smaller image which does fit on a standard 700MB CD-R. The new file is ecs20beta3a_cd1_en.ZIP. ] This beta offers a number of improvements that we would like to have tested on a larger number of configurations. These are: ** Preboot harddisk integrity check ** there are a couple of situations that cause installation problems with LVM later on in the install process. These will now be detected before the installer starts and an option to fix them is being presented. If you choose not to fix them, you are not able to proceed the installation. This technology uses a custom DFSee 'engine' and should be safe, however, neither Serenity Systems International nor Fsys can be held liable for any damages that may occur to the data on your harddrive. !!! When testing beta software, always be sure to have a tried and tested backup of your system !!! ** Harddisk volume resizing ** This beta has a custom DFSee engine that enables reliable RESIZING of FAT32 and NTFS filesystems to allow shrinking an existing Windows installation to make room for eComStation on the same system. To use this feature in this beta, you need to select it from the Maintenance Console (when booted from CD) and select "Resize Disk" under the "Disk" menu. The GUI interface of this feature will be updated before the final release of eComStation 2.0. ** Genmac ** This package provides generic driver support for several network interface cards under OS/2 and eComStation. Moreover, Genmac is enabled to support WPA encryption with the Wireless LAN Monitor 3.x or better. Genmac and the Wireless LAN monitor will be installed when the appropriate hardware is detected by the installer. If it is not detected, you can manually select the driver in the network installation dialog. Note: only the selected driver will be copied onto your system, in order to prevent problems with the MPTS installer later on. This may seem confusing, when you run MPTS in a later stage, it will not show all Genmac supported NICs. A full list of supported NIC chipsets can be found in 'WHATSNEW.TXT' ** ACPI & APM ** Support for ACPI is available in this beta. The current version is 2.15. ACPI will be automatically enabled if appropriate hardware is detected. You can manually enable or disable ACPI support at page 2 (miscellaneous) of the eComStation installer preboot menu. Even if not installed, the corresponding documents are installed on your harddrive. You can find detailed information and testdocuments in \ECS\DOC\ACPI and \ECS\DOC\APM Several tests can be performed, please refer to \ECS\DOC\ACPI\TESTER.DOC and \ECS\DOC\APM\TESTER.DOC ** Core Duo CPU support (SMP) ** This beta supports the installation of eComStation on a Core Duo computer. To enable it, please select the appropriate feature in the installer 'Select Components' page (only available in Advaned Install mode). This enables the use of Intel Dualcore, Hyperthreading and multi-CPU systems. Please note: AMD Dual Core CPU's are currently unsupported. Also, many drivers are not SMP capable, which may cause instability or unexpected behaviour on your system. For more information please refer to \ECS\DOC\ACPI\ACPI_SMP.DOC ** eComStation Virtual File System (Samba client support) ** Serenity Systems International has reached an agreement with Blueprint Software Works for the inclusion of the 'eComStation Virtual File System' driver which provides support for Samba Client. Currently a GUI to configure it is lacking, but an example of how to mount a Samba resource can be found in \ECS\DOC\EVFS\REXX ** eSchemes ** eSchemes (in this beta we include version 1.37) provides a new way to configure the look and feel of the desktop. This is considered highly experimental and as such can only be installed with Advanced Installation, under "Experimental Features" the option to select is "Interface customization". Traditional "eStyler" functionality is lacking, for example the titlebar customization. Feedback on eSchemes is highly appreciated. You can find documentation on eSchemes in \ECS\DOC\ESCHEMES\. Depending feedback of this beta we will decide if eSchemes will be available in the GA release eComStation 2.0. == REPORTING == To tell us your findings, please create a report at: http://www.ecomstation.com/support/beta3report/ You are also welcome to join the TestTeam if you want to discuss this beta and future developments. See http://ewiki.ecomstation.nl/TestTeam for more details. The file to download is: ecs20beta3_cd1_en.zip == REGISTRATION KEY REQUIRED FOR INSTALLING == For the time being you can use the eComStation 1.2 (or 1.2R) key to install this beta release of eComStation 2.0. Please read the full README document in the root of the CD, or online at: http://ewiki.ecomstation.nl/ecomstation20beta3 ---- !Warning the ISO file is slightly larger than 700 MB so could run into trouble on certain CDR media! Enjoy! -- Warpstock 2007 - Where? http://www.warpstock.org Warpstock Europe - http://www.warpstock.net [Moderator's note: All posts are sent without guarantee to the accuracy of the content. We try to verify details and URLs but this is an entirely volunteer run list, so 100% fact checking and the quality/useability of products announced here is impossible. If you respond to this post please remove the DESPAM from the poster's email addresses. Please do not send requests for information about a specific post to the moderator unless it is an update or I sent it.] -- To unsubscribe yourself from this list, send the following message to majormajor at os2voice.org unsubscribe news your.email.address at here end Or, visit http://www.os2voice.org/MailingLists.html If you have an announcement you would like posted to the VOICE News list, please send it to submit at os2voice.org or go to http://www.os2voice.org/fSubNews.html . Please include a valid reply address and a real contact name. If you wish to comment on this post, please reply to feedback at os2voice.org