Date: Fri, 29 Feb 2008 09:47:52 -0500 From: madodel Subject: [VOICENWS] SW: bootAble 6.0 released ++ From the VOICE OS/2-eCS News Service http://www.os2voice.org ++ From: Hayo Baan Somewhat more than a month after the last major release, yet another major release :-) This time the major change is the addition of GENMAC support as well as the ability to specify ZIP and WPI archives as a source for files. As always you can download bootAble from the website. http://www.xs4all.nl/~hrbaan/bootAble/index.html bootAble is an OS/2/eCS script to create a maintenance partition or a bootable CD/DVD. This partition or CD/DVD supports enough facilities to fully manage and recover your system. The full changelog is included below. v6.0 (29/02/2008) A big thanks to Doug Bissett for his quick testing, input, and feedback! This version of bootAble has removed a few configuration files, please read the notes below to see if you need to adapt the way you are currently using bootAble. To remove the old files altogether, run the command bootAble.cleanupInstall.cmd. For the WPI distribution of bootAble, this is done automatically. * Important: The TAR version that is included with eCS 2.0 RC4 does not work with bootAble, make sure you are using the correct version! See also above, under Known Issues/Limitations; * Added support for version 2.1 of the GENMAC drivers (GENMACSOURCE, GENMACDESTINATION, GENMACDRIVER, thanks Doug Bissett); Note: This only works for a GENMAC driven card that is currently installed and used on your system. You can not create a GENMAC setup for another system/network card! See also above, under Known Issues/Limitations. * Added support for the XWLAN wireless lan utility (XWLAN, XWLANXWP, XWLANSRCZIP, XWLANDESTINATION, thank you Doug Bissett); * The automatic network card driver determination method, now ignores duplicate entries of the same network driver; * Added support for booting off a JFS maintenance volume (FORMATMAINTENANCEJFS, thank you Doug Bissett); Note: Only works if you have eCS 2.0 and if your system already boots off a JFS volume! * You can now tell bootAble to retrieve files from a ZIP or WPI archive (EXTRAZIPWPIS, EXTRAZIPWPIDIRECTORY.n, EXTRAZIPWPIFILE.n, EXTRAZIPWPIOPTIONS.n, EXTRAZIPWPIDESTINATION.n, EXTRAZIPWPIADDTOPATHS.n); * The Mozilla application configuration files have been completely reworked and should now (finally?) work on most systems (see alse above, under Known Issues/Limitations); Note: you will probably have to change your bootAble.myCfg and/or calling scripts to accommodate the changes. o Added configuration files for Thunderbird and SeaMonkey (bootAble.thunderbird, bootAble.seamonkey); o The Mozilla applications now take their files from the distribution archives (APPSRCZIPWPI_FIREFOX, APPSRCZIPWPI_MOZILLA, APPSRCZIPWPI_SEAMONKEY, APPSRCZIPWPI_THUNDERBIRD); o An empty profile is now provided for each of the Mozilla application. These profiles contain some important pre-sets and will prevent some of the crashes the applications suffered from (e.g., default home page, cache sizes, etc.). You can of course specify your own profile, or none at all, as well (APPSRCZIPWPI_FIREFOXPROFILE, APPSRCZIPWPI_MOZILLAPROFILE, APPSRCZIPWPI_SEAMONKEYPROFILE, APPSRCZIPWPI_THUNDERBIRDPROFILE); o You now set the profile base directory with MOZILLA_HOME, this setting is shared between all Mozilla applications;. o Peter Weilbacher's build are now supported as well (thanks, Christian Hennecke and Doug Bissett); * You can now define the XWorkplace widgets to be used more easlily by specifying your own widgets using WPSXWPXCENTERWIDGETS in bootAble.myCfg; Note: make sure you enter everything exactly as XWorkplace expects it, or else XCenter will fail to start! * Integrated the extra command-line applications, XWorkplace and the EMX and GCC Runtimes into bootAble you now enable these packages with a single setting (OS2EXTRA, WPSXWP, EMXRT, GCCRT); Note: you may need to change your bootAble.myCfg and/or calling scripts to accommodate this change as bootAble.extra, bootAble.xwp, bootAble.xwpRC and, bootAble.emxrt do not exist anymore and as there is now an integrated way to enable these packages. * Reworked bootAble.dfsee to get the source files from a distribution file (either the OS2/eCS only, WPI, or full distribution), also removed bootAble.dfseeRC as this file is no longer required. Note: you may need to change your bootAble.myCfg and/or calling scripts to accommodate this change. * You can now specify whether or not you want cachef32.exe loaded when enabling FAT32 (FAT32CACHEF); * You can now specify inclusion of the regedit2 WPS program (WPSREGEDIT2, WPSREGEDIT2DESTINATION); * The XCenter setup now checks to see whether or not the required dlls are present for the widgets, if the required dll does not exists, the widget is not installed; * XCenter setup now enables the LSWitcher widget instead of the standard Window List widget if it is found on the system; * When using the US103 keyboard, the US unicode keyboard definition is used if the US103 one could not be found; * Added the ability to add DLLBASING=OFF to the config.sys (DLLBASINGLINE); * Added support for the APM hibernation compatibility settings ENH_SUSPEND and SNAP_APM_REPAINT (APM_ENH_SUSPEND, APM_SNAP_APM_REPAINT); * You can now comment-out files in an / at file-list, simply put a semicolon in front of the line you don't want to have included; * If bootAble can not find a configuration file or / at list file, one is now asked whether or not bootAble should abort or ignore the error and continue; * Updated SNAP SE support to allow for the latest eCS SNAP SE version (snapse-ecs-3.1.8.zip, thank you Doug Bissett); * SNAP SE user ini settings are now properly located in the bootAble.Urc file instead of being hard coded in the bootAble script; * Added bootAble.f, configuration file for the F file manager (contributed by Christian Hennecke); * Updated bootAble.dragtext to support drag text versions 3.8, 3.9, and up(?) (thanks, Doug Bissett); * Updated ConfigMaker.cmd to the latest version (contributed by Doug Bissett); * Set TCPIPDHCPTIMEOUT to 0 by default. This prevents unnecessary delays at startup, especially if you're using a wireless LAN card, and seems to be the new default anyway; * Removed MEMDISKDASDFALLBACK setting as the memdisk.i13 file does not exist anymore (thank you Doug Bissett for pointing this out). -- For a choice in the future of personal computing, Join VOICE - http://www.os2voice.org [Moderator's note: All posts are sent without guarantee to the accuracy of the content. We try to verify details and URLs but this is an entirely volunteer run list, so 100% fact checking and the quality/useability of products announced here is impossible. If you respond to this post please remove the DESPAM from the poster's email addresses. Please do not send requests for information about a specific post to the moderator unless it is an update or I sent it.] -- To unsubscribe yourself from this list, send the following message to majormajor at os2voice.org unsubscribe news your.email.address at here end Or, visit http://www.os2voice.org/MailingLists.php If you have an announcement you would like posted to the VOICE News list, please send it to submit at os2voice.org or go to http://www.os2voice.org/SubmitNews.php . Please include a valid reply address and a real contact name. If you wish to comment on this post, please reply to feedback at os2voice.org