EmperoarTV change log --------------------- Version 1.08s ------------- - FM radio on PVR500MCE cards works now. - Support for Microsoft MCE remote control found in Hauppauge's "MCE Kits" (USB-attached IR receiver). This will also allow to use the Microsoft MCE Remote Keyboard. ATTENTION: You may need to replace USBUHCD.SYS and USBOHCD.SYS with the included versions ! - Support for the remote control transmitters that come with TechnoTrend's Budget DVB cards. - Scheduler allows execution of programs or scripts after recording completion. - Manually initiated recordings can now be finished automatically by specifying the remaining recording time and the file set name. - Menu item "Play/Video DVD" will play the largest title set on the first CD/DVD drive in the system, that has a video DVD media loaded. Version 1.08r ------------- - Increased volume in FM radio mode on PVR150MCE cards. - Philips MK3 compatibe tuners now set to "FM high sensivity". - New command line option -x to start GUI in full screen. - Video window will remain in full screen when switching between TV view and playback. - Full screen will be restricted to current head in SNAP overlay + multihead configurations. - Initial support for Onscreen Display functionality. (Hint: install InnoTek FontEngine to improve appearence) - "Recording schedule" dialog now shows end time as well. - Bugfix: File renaming / timezone problem on scheduled recordings. - Mouse scroll wheel will now only affect volume. Version 1.08q ------------- - Video digitizer / broadcast decoder is now powered down when card not in use. Note, that for cards equipped with CX23416 (iTVC16) idle power consuption and the associated heat generation can be reduced further by adding /P to the driver command line in CONFIG.SYS. This, however, will increase the startup time of the application. - Driver now supports raw PCM audio capture (even though currently not used by the application). - New driver option /F will cause a silent fail (no stop in CONFIG.SYS processing) when no card is found. - MPEG decoder now paused during channel change. This may improve channel change behaviour especially on PVR150/500 and MPG600 cards. - Support for tuner Samsung TCPN2121P30A and some models by TCL Corporation. - Transparent parts of GIF logos are now shown as white - Removed open/close "zoom" effect on application windows to avoid interaction with system sounds. - Double click on snapshot preview will open the system- defined picture viewer. - Bugfix: Avoid occasional bursts of static after channel change (PVR150/500 only). - Bugfix: Sound volume preserved after sample rate change within a file or errors in audio stream. - Bugfix: Audio sample rate adaption not working in FM mode. Version 1.08p ------------- - PVR150/500 produces 704x576 instead of 720x576 in PAL mode to remove these nasty black borders on left and right sides - Optimized filter settings for PVR150/500 in PAL mode - "Station name list" now has a context menu - Channel scan will assign default names to newly found stations - Bugfix: Tune menu in disabled state doesn't show station logos (depends on graphics card) - Bugfix: Remote control page in settings notebook showed CH0 for unassigned keys - Bugfix: Video window one pixel to narrow in 704x576 resolution - Bugfix: Access to SNAPOverlay now serialized Version 1.08o ------------- - From now on WarpIN will be used as installer - Support for Hauppauge WinTV PVR150, PVR150 MCE and PVR150 l.p. cards - Experimental support for the following cards: Hauppauge WinTV PVR500 MCE Yuan MPG600GR Rev1.1 (PAL B/G only, no NICAM !) - The following cards *MAY* also work: Yuan MPG150, MPG160 and MPG600 Rev1.0 Yuan PG600 Falcon 2 Diamond XtremeTV PVR550 Adaptec VideOh! AVC-2410 - User editable capture profiles - Logo selection dialog will now show file names - Fix for video window empty after minimize (SNAP Overlay) - Fix for logos in RLE24 bitmap format showing up black - Misc. minor bugfixes, new tuner models Version 1.08n ------------- - Tuner is now initialized on bootup to avoid RF interference due to undefined tuner state - Forced mono now stored on per channel basis and applies to scheduled recordings as well - Adapt to overlay mode changes in SNAP 3.07 Version 1.08m ------------- - Support for native SNAP 3.x overlays. Needs to be enabled in the settings notebook. For suitable hardware refer to README.TXT that comes with your copy of SNAP graphics. If your video chipset is not listed, bug SciTech ;-). - Fixed FM radio mode for Microtune/Temic 4049FM5 tuner - Fixed TV audio in PAL D/K countries (Czech republic) - Improved TV stereo detection after channel change - GOP size in PAL DVD profiles is now 12 instead of 15 - Forced TV mono possible - Improved snapshot thumbnail creation (resample) - More accurate recording time countdown in VCR mode - TV window blanked during drag (except for SNAP overlays) - Switch from channel/frequency to time display when recording started interactively - Avoid problems on millisecond counter wraparound (> 47 days uptime) - Improved blur filter for better de-blocking of low quality MPEG1 Version 1.08l ------------- - Experimental support for Temic 4049FM5 multistandard tuner - Fixed Mono/Stereo re-detection after channel change - Fixed "card not found" error after warm reboot - New driver option /P reduces idle power consumption (works for iTVC16 based cards i.e. PVR250-16 only) - Composite input on PVR250-16 now selectable - Screenshot function added - Some drag and drop support - Video window "always on top" option - Station logos can now be BMP, GIF and JPEG - new version of DVDPREP 0.0.6 (previous one was bad !) Version 1.08k ------------- - Fast forward in VCR mode - Removed beeps when paused in VCR mode ;-). - Fixed missing sound, when first audio packet in file is bad - Playback file name shows up in control panel - Adapt to latest hardware changes on PVR350 cards - Support for new 45-key remote control unit - Enhanced tuner support, including Philips multistandard tuners - IVACTOOL now has an option to test remote control - new version of DVDPREP included - Another attempt to improve channel changes (as usual) Version 1.08i ------------- - National language support (English and German) - German installer version - Station logo support (GIF and BMP), suitable pictures can be found at www.tvtv.de or www.zap2it.com - Docking windows - Switch to external inputs via remote control - Another attempt to improve channel changes Version 1.08g ------------- - Support for files > 2GiB - New "comment" field in scheduler records - Fixed crash when running MPEGTV2 and IVACTOOL simultaneously - Import recording jobs from TVBrowser's CapturePlugin - Fixed stuttering problem on iTVC16 cards (PVR250 rev.2) - Another timing change dealing with VIA chip sets... Version 1.08f ------------- - Workaround for DMA hangs on VIA chip sets (hopefully) - Fixed possible crash in MPEGAUD2.DLL on bad input data - More recent encoder firmware now active by default - Fix for station group number not shown correctly - Corrected some typos in help file Version 1.08e ------------- - Bugfix for not showing "Mute" state when playing audio recordings - New icon (thanks to Klaus Staedtler-Przyborski) - Added context menu containing station names - Driver verifies Hauppauge EEPROM checksum Version 1.08b ------------- - Fix for timezone bug on registration Version 1.08 ------------ - First public release