IBM VisualAge C++ Professional for Windows NT, Version 4.0 - Fixpak 2
  --------------------------------------------------------------------

IBM VisualAge(R) C++ Professional for Windows NT(R), Version 4.0
  (C) Copyright IBM Corporation 1991, 1999 - All Rights Reserved.
  (C) Copyright IBM Corp and another 1991, 1999 - All Rights Reserved.
  (C) Copyright Microsoft Corp. 1985, 1996 - All Rights Reserved.

  US Government Users Restricted Rights - Use, duplication or disclosure
  restricted by GSA ADP Schedule Contract with IBM Corp.
------------------------------------------------------------------------

To install this Fixpak perform the following steps :

(1) Unzip the Fixpak into a temporary directory. The unzipped Fixpak 
    occupies just less than 55M bytes.

(2) Make sure you are currently in the directory into which the fixpak
    was unzipped.

(3) Issue the following command :
 
      SETUP

(4) If you are installing this Fixpak in Silent mode do the following:
    (a) If you are applying it to an XCOPYed LAN image, edit the file
        "setup.iss" by changing the 15th line from "szDir=h:\vacppCD"
        to "szDir=drive:\dir" where 'drive' is the drive letter and
        'dir' is the directory where the LAN image is to be found.   
    (b) Issue the command "SETUP -S"

-----------------------------------------------------------------------
The following conditions must exist for Fixpak installation to be
successful:

 (1) No IBM VisualAge C++ Professional tools can be open in any
     session when you install the Fixpak.

 (2) The Fixpak level must be equal to or greater than the previously
     installed level (if any). Note that Fixpaks are cumulative.

 (3) If you had XCOPYed the CD image to a LAN drive, you can apply
     this Fixpak to the LAN drive.  

 (4) If you are operating from a CD/Network install, the Fixpak
     must first be applied to the LAN image, and then applied to the
     local machine.
    

------------------------------------------------------------------------
The IBM Open Class libraries and source code which correspond to the 
level of the IBM Open Class libraries in this fixpack is not included
as part of this install.  Download the file fp2_ocs.zip from
ftp://ftp.software.ibm.com/ps/products/visualagecpp/fixes/v40win/fixpak2/fp2_ocs.zip
and unzip it in the X:\IBMCPPW40 directory where X is the drive on
which you installed VisualAge C++ Version 4.

