IBM ThinkPad                                         September 18, 1997
OS/2 Warp Version 4 Install Disk 1 Update

Version 1.00
=======================================================================

What This Diskette Does
-----------------------
The IBM ThinkPad OS/2 Warp Version 4 Install Disk 1 Update is a 
replacement of IBM OS/2 Warp Version 4 Install Disk 1.  This disk
fixes the following problems.

   - OS/2 Warp Version 4 cannot be installed on harddisks that have
     over 4.3GB capacity 
   - When ThinkPad 770 is docked to SelectaDock III and an IDE 
     device in SelectaDock III is assigned to secondary IDE channel,
     the IDE device is not recognized.

The following model is supported:

   - ThinkPad 770

Released Versions
-----------------

Version   1.00     Initial release for ThinkPad 770

Summary of Changes
------------------
 Where: <n.nn>  Diskette version (for example, 1.00 means Version 1.00)
        (New)   New function or enhancement
        (Fix)   Correction to existing function

<1.00>
 - (New) COPYFROMFLOPPY=1 added in CONFIG.SYS
         IBM1S506.ADD is updated

Installation Guide
------------------
OS/2 Warp Version 4 comes with three diskettes for installation.
This update disk is a replacement for "Disk 1".

1. Install OS/2 Warp Version 4 from the Install Disk
2. When you are prompted to insert Disk 1, use this diskette
3. Continue installing OS/2 Warp Version 4

<Installation Disk for Warp Version 3>
The information is available from the following web site.
  http://service.software.ibm.com/os2ddpak/index.htm

When the home page appears, do the following.  (The procedure is
subject to change without prior notice)
1. Click on "Yes, I agree.  Show the Device Category List..."
2. Click on "OS/2 Component Updates"
3. Click on "Installation Diskette Update"
4. Click on "> 4.3GB IDE Hardfile Support"
5. Follow the instructions

Trademarks and Service marks
----------------------------
 IBM, OS/2 and ThinkPad are trademarks of IBM Corporation.