Quick Beginnings

Chapter 29. Installing DB2 Clients on Windows 3.x Workstations

If you are planning to support only local communications from a WIN-OS/2 session to an OS/2 server, it is recommended that you use the local Windows Support supplied with the DB2 for OS/2 server, and do not install the Windows 3.x Client Application Enabler. Go to Chapter 5. "Installing DB2 Connect on OS/2 Systems" to install Windows support on your OS/2 server.

Note:

If you have a previous version of the DB2 Client Application Enabler for Windows 3.1 installed on your system, it is recommended that you back it up before beginning this installation procedure.

To install the DB2 Client Application Enabler on Windows 3.x workstations:

1. Insert the DB2 Client Pack CD-ROM that contains the Windows 3.x client into the drive.

2. To begin the installation program enter:

   x:\db2\windows\language\install\install.exe
   

   where x: is the letter representing your CD-ROM drive and where language is the two-character country code that represents your language (for example, EN for English). Table 47 lists the code for each available language.

   The Install window opens.
   

   
   

3. In the Install window, indicate whether or not you want to update the autoexec.bat file as part of the installation.

   • If you want the autoexec.bat file updated, check that the Update CONFIG.SYS/AUTOEXEC.BAT check box is selected, then click on OK. A backup copy, called autoexec.bak, is created in the same directory as your autoexec.bat file.

   • If you do not want the autoexec.bat file updated, clear the Update CONFIG.SYS/AUTOEXEC.BAT check box. You will need to manually update your autoexec.bat file with the values that are stored in the autoexec.add file.
     

     The Overwrite files check box is selected by default, it is recommend that you do not change this setting.

4. Click on OK to continue. The Install-directories window opens.
   
   

5. In the File directory field, type the directory where you want the product installed. The default value is c:\sqllib.
   

   If you are installing the DB2 Client Application Enabler for Windows 3.x on an OS/2 system that already has the DB2 Client Application Enabler for OS/2 Version 5 product installed, enter the same directory in the File directory field as the DB2 Client Application Enabler for OS/2 product. This will merge the two DB2 directories together, allowing tools like the Client Configuration Assistant to be used to configure clients to access a remote DB2 database for both Windows 3.x and OS/2 applications.

6. Select the components that you want to install.

7. Click on the Install push button to start the installation. A progress window appears until the installation is complete.

   You can click on the Stop push button at any time to end the installation.

8. Once you have completed the installation, shut down and reboot your system.

To configure your client to access a remote DB2 Connect server, see Chapter 33. "Configuring Client-to-Server Communications Using the Command Line Processor".

[ DB2 List of Books | Search the DB2 Books ]