Before you configure the DB2 Connect workstation, have your host-side administrator and LAN administrator fill in copies of the following worksheet for each host to which you want to connect (see Table 14).
After you fill in the Your Value entries, you can use the worksheet to configure IBM Communications Server for Windows NT SNA Client. As you perform the configuration, replace the sample values that appear in the configuration instructions with your values from the worksheet. Use the boxed numbers (1) to relate the configuration instructions to the worksheet values.
Table 14. Worksheet for Planning SNA Client Connections to Communications Server/NT
| Ref. | SNA Client Name | Sample Value | Your Value |
|---|---|---|---|
| Network Elements at the Host | |||
| (1) | Host Name | SPIFNET |
|
| (2) | Partner LU Name | NYM2DB2 |
|
| (3) | Network ID | SPIFNET |
|
| (4) | Control Point Name | NYX |
|
| (5) | Database name | NEW_YORK3 |
|
| (6) | Mode Name | IBMRDB |
|
| (7) | Link Station Name | LINKHOST |
|
| Network Connection Information | |||
| (8) | Destination address | 400009451902 |
|
| Network Elements at the DB2 Connect Workstation | |||
| (9) | Network Name | SPIFNET |
|
| (10) | Local Control Point Name | NYX1 |
|
| (11) | Local LU name | NYX1GW01 |
|
| (12) | Local LU alias | NYX1GW01 |
|
| (13) | Block ID | 05D |
|
| (14) | Physical Unit ID | 27509 |
|
| (15) | Mode name | IBMRDB |
|
| (16) | Symbolic Destination name | DB2CPIC |
|
| (17) | (Remote) Transaction program (TP) name | X'07F6C4C2' (or RDB_NAME for DB2 for VSE & VM) (or DB2DRDA for DB2 for OS/390 or DB2 for MVS) |
|
| DB2 Directory Entries (at the DB2 Connect workstation) | |||
| (18) | Node name | db2node |
|
| (19) | Security | Program |
|
| (20) | Database name | db2db |
|
| (21) | Database alias | nyc3 |
|
| Elements at the Communications Server | |||
| (22) | User name | CSNTUS1 |
|
| (23) | Password | ******** |
|
| (24) | IP address | 123.123.123.123 |
|