Messages Reference
When using NetBIOS, the following is a list of hexadecimal return codes
that the user may encounter most frequently.
It is NOT a complete list of return codes.
- 01
- Invalid buffer length
- 03
- Invalid command
- 05
- Command timed out
- 06
- Message incomplete
- 07
- Data not received
- 08
- Invalid local session number
- 09
- No resource available
- 0A
- Session closed
This error could be caused by one of the
following:
- The database agent at the server was forced off by the system
administrator.
- A database agent could not be started at the server because
the maxagents database manager configuration parameter
has been exceeded. Check the First Failure Service Log (DB2DIAG.LOG)
at the server to see if an error message has been logged.
- The database agent at the server was terminated due to an
abnormal termination of a key database manager process.
- 0B
- Command cancelled
- 0D
- Duplicate name used on the network
- 0E
- Name table full
- 0F
- Command completed (name has active sessions and is now
deregistered)
- 11
- Local session table full
- 12
- Session open rejected
- 13
- Invalid name number
- 14
- Remote name not found
If this error occurs when trying to connect to the database, ensure
that:
- The database manager has been successfully started at the
server, and NetBIOS support has also been successfully started.
- The server nname specified in the NETBIOS node entry at the
client, matches the workstation name specified in the database
manager configuration file at the server.
- 15
- Local name not found
- 16
- Name in use on remote node
- 17
- Name deleted
- 18
- Session ended abnormally
- 19
- Name conflict detected
- 21
- Interface busy
- 22
- Too many commands outstanding
- 23
- Invalid adapter
- 24
- Command already completed
- 26
- Command invalid to cancel
- 30
- Name defined by another environment
- 34
- Environment not defined, RESET must be issued
- 35
- Required operating system resources exhausted, retry later
- 36
- Max applications exceeded
- 37
- No SAPs available
- 38
- Requested resources not available
- 39
- Invalid NCB address
- 3A
- Invalid reset
- 3B
- Invalid NCB DD ID
- 3C
- Segment lock unsuccessful
- 3F
- Device driver open error.
- 40
- OS error detected
- 4F
- Perm ring status
- F6
- Unexpected CCB error
- F8
- Adapter open error
- F9
- Adapter support software internal error
- FA
- Adapter check
- FB
- NetBIOS not operational
- FC
- Open failures
- FD
- Unexpected adapter close
- FF
- Command in process
For more information on NetBIOS return codes, refer to the Local Area Nerwork
technical reference.
[ Top of Page | Previous Page | Next Page | Table of Contents | Index ]
[ DB2 List of Books |
Search the DB2 Books ]